Blue Iris Ui2 snapshot

[broper30]

Is there a way to take a snapshot in the UI2 interface?

 

[Q™]

I'm reasonably certain you know this, but Ui2.htm is not a part of the Blue Iris software. You could click on a camera (to maximize that camera's view) and then do a screen print. Not pretty, but it would work.

 

[broper30]

Ok, thank you for verifying.

 

[pozzello]

Perhap this is useful:

http://<your_BI_IP>:<port>/image/{cam-short-name}?q=50&s=80
A single JPEG image from a specific camera, with optional quality (q) and scale (s) parameters. Quality is a percentage from 1-100, and scale may be any number >0.

from Bill Scruggs' most useful post at

https://www.ipcamtalk.com/showthrea...-works-with-VERA?p=54841&viewfull=1#post54841

 

[Git]

Perhap this is useful:

http://<your_BI_IP>:<port>/image/{cam-short-name}?q=50&s=80
A single JPEG image from a specific camera, with optional quality (q) and scale (s) parameters. Quality is a percentage from 1-100, and scale may be any number >0.

from Bill Scruggs' most useful post at
https://www.ipcamtalk.com/showthrea...b-Pages-Securely?p=21594&viewfull=1#post21594

That works out quite well - thanks for the info (and to Bill Scrugg's)

 

[bp2008]

Also, it is kind of a hidden feature, but if you are using a device with a mouse, you can left-click-and-hold for about 1 second and a context menu will appear which allows you to trigger the motion detector for the camera under the pointer or start/stop a manual recording.