Blue Iris Settings for Reolink 410 POE camera

markcohn28

n3wb
Dec 15, 2015
25
1
I'm unable to get a Reolink 410 POE camera to display any video on my licensed Blue Iris (4.2.7.1 x64) software. I've installed the latest firmware on my Reolink 410 POE camera and searched web for help. I've attached screenshots of from the Reolink camera system information and my Blue Iris configurations. I even tried to use generic settings with no luck. I've changed the default ports to the following:

http: 169
Media: 1169
RSTP: 11169

I can get the camera to display via a browser from within my network and from the outside so I know the camera works. Any help will be much appreciated. Thanks, Mark

RLC-410.jpgRLC-410_BlueIris2.jpgRLC-410_BlueIris1.jpg
 
I'm unable to get a Reolink 410 POE camera to display any video on my licensed Blue Iris (4.2.7.1 x64) software. I've installed the latest firmware on my Reolink 410 POE camera and searched web for help. I've attached screenshots of from the Reolink camera system information and my Blue Iris configurations. I even tried to use generic settings with no luck. I've changed the default ports to the following:

http: 169
Media: 1169
RSTP: 11169

I can get the camera to display via a browser from within my network and from the outside so I know the camera works. Any help will be much appreciated. Thanks, Mark

View attachment 7482View attachment 7483View attachment 7484
Welcome to the forum. In blue iris enter the rtsp port not the media port, in the media/rtsp section.
 
I asked the manufacturer about turning off the IR leds, they said there was no way other than to put the camera into 'Daytime' mode instead of Auto/Night.