Blue Iris no audio

[JHooK]

Hi,

I have IP cams:TP Link 7141 and DVRs: Dahua h.264 RSTP I`ve configured all settings but cannot hear any audio streaming, with SmartPSS audio works fine.

What I am doing wrong?

 

[fenderman]

@JHooK Welcome to the forum. The blue iris options microphone audio settings are for when you use a mic to "talk" to a camera...those are not relevant here...
In the camera settings (your second picture) select "ip camera stream" not directshow..

 

[JHooK]

Thank you,
I was trying before with IP camera stream, but in this case the video signal disappears and I receive an RTSP:404 NOT FOUND error

 

[fenderman]

That should not be happening email support to let him know about the problem..are you running BI3 or BI4...if 4 and you are using 64bit, run 32 bit instead...

 

[JHooK]

I`m using BI4 32bit now, very strange because from some cams I have audio signal from other no, I can guess this is because of no enough bandwidth to transport audio+video same time

 

[fenderman]

I dont think its the bandwidth...if you have audio using the browser to login to the camera then you should get audio in blue iris.

 

[JHooK]

Solved. For me the problem was in ports, I just enabled RTSP/UDP port and everything goes OK for all my cams.