Blue Iris in LAN separate from Cameras VLAN with DD-WRT ?

[Aronder]

Currently my Blue Iris server is on the 192.168.1.x VLAN with the cameras.
I would like to move the Blue Iris server to the 192.168.0.x LAN and leave the cameras on the 192.168.1.x VLAN.
With the DD-WRT router is it possible to bridge the cameras to only be accessible by the Blue Iris server from the LAN?

 

[Old Timer]

You can always add a second NIC (ethernet) to access the camera network.
The instructions are on this site,

 

[TonyR]

+1^^.
If you can meet these conditions, follow this and set up accordingly, then great ==>> VLAN Support - DD-WRT Wiki
Otherwise, installing a second NIC in the BI server as mentioned by @Old Timer will definitely keep your cams off the 'Net.

 

[Aronder]

I failed to mention that the Blue Iris server is an Intel NUC which is difficult to add a second NIC.

 

[TonyR]

I failed to mention that the Blue Iris server is an Intel NUC which is difficult to add a second NIC.

You could use this ==>> USB to Ethernet adapter

 

[Aronder]

You could use this ==>> USB to Ethernet adapter

Good idea - I'll try it.

 

[looney2ns]

Dual NIC setup on your Blue Iris Machine

In making your system more secure this is a great option to eliminate your cameras calling home / connecting to the internet This is a great place to start to setup a bit more secure network and learn more about IP/Subnets etc. before adding dual NICs: Router Security - Subnets and IP addresses...

ipcamtalk.com