I'm fairly new to Blue Iris, and have never touched an Arduino Uno before this project, I'm trying to use the gpi pins on the Uno to trigger a camera to go into record, and possibly save a JPEG still. Is this even possible? If so, does anyone have a sketch of something similar they are willing to share?
I tried before with XP now I bought BI 64-bit and i have connected BI with my Arduino Alarm system PIR control
but i loosed a lot of time and I HAVE THE SAME PROBLEM and I really tried everything!!!
When I send on the serial port DIO 1 with ARDUINO by using "serial.write(n)" serial.print(), serial.println(), serial.print(n, BIT) , with all number, 1,2,3,4,5,6,7,8,9,10,11.. 32.. 49,50,51 64 and also byte : <<c = B00110001; Serial.write(c); >>
MANY CAMERA (with different DIO) ARE SIMULTANEUS TIGGERED !!!!! 8for example DIO 1-3-5-7 , DIO 2-3-6-7 ecc). Just serial.write(8) trig the just ONE camera with DIO 8 selected in the trig/motion option
In the opposite direction, BI to arduino, with serial.read() i receive correctly number 48,49,50....
The Blue Iris Support respond: << I apologize but I have no example ... I had that working years ago but not since>>
