Blocking WAN access

S

spacebiscuit

n3wb
Feb 13, 2020
2
0
UK
Hi,

I have a Sricam IP cam which I want to disable WAN side. I have set my router to block all inbound ports 1-65535 TCP/UDP and I have disabled UPnP - but I am still able to connect to the camera's on my phone's app when disconnected from my LAN and using my phone's data network.

How can I stop or block access from outside of my LAN. The camera does not specify a model number on the bottom - looks like every other cheap IP Cam on the market currently.

Thanks.
 
Depending on your router, on some routers there are parental controls that allow the blocking of the MAC address. I have blocked all camera mac addresses.

Or another option is to set up a Vlan and put the camera on the seperate vlan.

Is the camera a cloud camera ?

are you recording the camera on the local network ?
 
  • Like
Reactions: looney2ns
Unfortunately my router does not offer MAC filtering - only IP. So is the VLAN my only option.

Thank you for the lightening fast replies!
 
I had the same problem that I could not block individual Mac addresses only IP ranges. Is why I upgraded to a ubiquity UDM router and solved all my issues
 
Chances are your cam is connecting to your phone after they do some sort of handshake between an 'intermediate service' to figure where your phone is. Are you able to block outbound access for the cam itself ?
 
You must log in or register to reply here.
Top Bottom