IP cam research is a DIY nightmare or Disney land ride depending on your interest level in IP technology. There's an unbelievable number of details. I've spent dozens of hours reading here and elsewhwere, and just when I think I know what I need another variable pops up. . . so, I'm posting and hoping this isn't covering ground detailed elsewhere here.
Ultimate goal: stream high quality vids of my bird feeder to youtube
Current status: After my first round of research, I bought a cheap sv3c 55.00 5mp cam. Since I didn't know much, I thought this would be an good way to learn and get a baseline from which to advance. It's been a big help and fun.
Next step: I'd like to bump up the quality and go for a camera in the 200 range or so. Here's what I (think) I'm looking for:
So basically I"m looking for a simple daytime cam with a good sensor, lens, and res that can easily stream directly to the web. Any suggestions would be helpful. An indoor cam would likely work since it's stationary and I could build a housing for it. I'm willing to make some compromises (resolution for one), and will likely work my way up the quality chain in small steps.
Ultimate goal: stream high quality vids of my bird feeder to youtube
Current status: After my first round of research, I bought a cheap sv3c 55.00 5mp cam. Since I didn't know much, I thought this would be an good way to learn and get a baseline from which to advance. It's been a big help and fun.
Next step: I'd like to bump up the quality and go for a camera in the 200 range or so. Here's what I (think) I'm looking for:
- outdoor (ip65)
- poe
- good quality lens and sensor
- 4mm or larger
- 2k+
- 24fps minimum; 20-60 adjustable based on res settings ok.
- audio
- bitrate???
- RTMP?? RTSP?? HLC?? Want to stream directly to YT without intermediate software/hardward. Camera direct to YT.
- Optional: 3d DNR
- Night vision
- wide angle
- PTZ
- autofocus
So basically I"m looking for a simple daytime cam with a good sensor, lens, and res that can easily stream directly to the web. Any suggestions would be helpful. An indoor cam would likely work since it's stationary and I could build a housing for it. I'm willing to make some compromises (resolution for one), and will likely work my way up the quality chain in small steps.
As an Amazon Associate IPCamTalk earns from qualifying purchases.