- Mar 5, 2017
- 23
- 1
I have been running BI for a couple of years or so now as well as having 2 Hikvision CCTV cameras and 2 Merit Lilin CCTV cameras.
For the last day or so one of the HIkvision cameras is not showing any picture as BI reports No Signal.
I have unplugged the Cat5e cable from the switch and then plugged it back in again. The switch shows that data is being transmitted, as all the green leds are flashing. I have also shutdown BI and restarted it again, then I did a complete reboot of the windows7 system, but still no picture. I then removed the password and retyped it again, but after checking the basic stuff like IP address , there is still no picture. On checking outside , the cable looks as though it is still in the connection box, and with digging out my ladders, I am not 100% sure, but yet data is being transmitted.
Anything else it could be to cause the No signal.
For the last day or so one of the HIkvision cameras is not showing any picture as BI reports No Signal.
I have unplugged the Cat5e cable from the switch and then plugged it back in again. The switch shows that data is being transmitted, as all the green leds are flashing. I have also shutdown BI and restarted it again, then I did a complete reboot of the windows7 system, but still no picture. I then removed the password and retyped it again, but after checking the basic stuff like IP address , there is still no picture. On checking outside , the cable looks as though it is still in the connection box, and with digging out my ladders, I am not 100% sure, but yet data is being transmitted.
Anything else it could be to cause the No signal.
