Finally got my HV DS-2CD2342WD-I cameras - 6 of them. While waiting I built a Windows 10 Box with an I7-4790K, 16GB RAM, as a dedicated machine for BI. Started hooking up cameras yesterday and when I got to about 4 I realized my box was maxing CPU out. I went ahead and connected them all to start troubleshooting but cannot seem to get it to drop with BI Console open. As a service it did drop to about 60%. I was wondering if there are some settings on these cameras I need to change. (I did enable H.264+) which seemed to drop bps inbound in 1/2 almost per camera.
[h=1]Intel Core i7-4790K Devil’s Canyon Quad-Core 4.0 GHz LGA 1150 BX80646I74790K Desktop Processor Intel HD Graphics 4600[/h][h=1]ASUS Micro ATX DDR3 1600 LGA 1150 Motherboard B85M-G R2.0[/h]16GB Corsair Vengance DDR3 Ram
Windows 10 Home 64-bit
BI 64-bit
New install
Nothing else installed on it save some utilities for camera.
CPU without BI runs at < 1%
BI console runs ~99%
Cameras @ 15fps, h.264+
BI recording direct-to-disk
Seems that I have something going on here but like I said, when BI is shut down CPU is basically at 0. Running Resource monitor you can see BI is grabbing it all. With 6 cameras, Net i/o is about 10-15Mbps inbound. Outbound to NAS is not significant compared to this.
My camera network is wired and isolated from my home network. BI server has wifi to Internet. I wanted to keep this all isolated from my home network.
I know this isn't much to go on but I figured I would see if anyone has any pointers.
[h=1]Intel Core i7-4790K Devil’s Canyon Quad-Core 4.0 GHz LGA 1150 BX80646I74790K Desktop Processor Intel HD Graphics 4600[/h][h=1]ASUS Micro ATX DDR3 1600 LGA 1150 Motherboard B85M-G R2.0[/h]16GB Corsair Vengance DDR3 Ram
Windows 10 Home 64-bit
BI 64-bit
New install
Nothing else installed on it save some utilities for camera.
CPU without BI runs at < 1%
BI console runs ~99%
Cameras @ 15fps, h.264+
BI recording direct-to-disk
Seems that I have something going on here but like I said, when BI is shut down CPU is basically at 0. Running Resource monitor you can see BI is grabbing it all. With 6 cameras, Net i/o is about 10-15Mbps inbound. Outbound to NAS is not significant compared to this.
My camera network is wired and isolated from my home network. BI server has wifi to Internet. I wanted to keep this all isolated from my home network.
I know this isn't much to go on but I figured I would see if anyone has any pointers.