I used it be in version 4.0.X.X had everything configured, updated a few weeks ago to 4.4.X.X. Motion capture operating normally in marked areas (green brush) in 4.0, but now after a few weeks with 4.4 I'm convinced either I've configured it horribly wrong or it's bugging on me.
First I started trying out with zone crossing (A-B) to cut down on shadows, but it's super unreliable so I've returned to basic single marked off zone.
Here are my settings:
When running it's falsely triggered and recorded clip with "test run video through motion detector" selected:
Then when pausing the video playback:
It's just a bunch of sporadic false recorded clips like this with motion activated by passing cars that are clearly not in the green masked zone. I have "highlight motion" enabled so you can see what's triggering it above and it's so far outside the masked zone, not sure why it keeps activating.
Any ideas guys?
Thanks
First I started trying out with zone crossing (A-B) to cut down on shadows, but it's super unreliable so I've returned to basic single marked off zone.
Here are my settings:
When running it's falsely triggered and recorded clip with "test run video through motion detector" selected:
Then when pausing the video playback:
It's just a bunch of sporadic false recorded clips like this with motion activated by passing cars that are clearly not in the green masked zone. I have "highlight motion" enabled so you can see what's triggering it above and it's so far outside the masked zone, not sure why it keeps activating.
Any ideas guys?
Thanks