BI 5.4.9.15 DeepStack

[ghostwalker42]

Hi All,

I dont know if this the right place to post this. I'm running the latest build of DS CPU and BI. I have followed a few post's and youtube video on how to setup DS but have run into a weird problem with it. I keep getting the Deepstack server 100 error. If anyone has run into this and got it working, a few pointers would be great. Below is a few of my DS config. Please let me know of anything I might be missing.

 

[wittaj]

The Error 100 means the system timed out. It usually does this around 5,000ms +-

With the exception of one above, yours were taking over 15,000ms to analyze, which means your system isn't capable.

You either have too old of a machine and it cannot keep up, you are doing too much on that machine and running other programs, or you have not followed every optimization wiki.

You are already using LOW mode. You could try unchecking the use mainstream box.

What CPU do you have and type of computer?

Optimizing Blue Iris's CPU Usage

Blue Iris uses a lot of CPU time. In most Blue Iris installations, your CPU is the limiting factor which determines how many cameras you can have. As such, it is extremely important to optimize your configuration to ensure you can get the most out of your system while consuming the least...

ipcamtalk.com

 

[ghostwalker42]

Thank you for getting back to me so quickly, Im running an I5 10500 with 11 camera's. The system is running at 13% CPU and 23% GPU. I put the support info below.

I will go though the optimization wiki once more to see if i missed anything.

I have also tried alerts list on Database only and Hi-res JPEGS. Below are some screenshots of the motion sensor setting and other stream settings.

Please let me know if you can think of anything else that might be causing it.

Once more thanks for the quick responce.










OS: Windows 10 Pro
CPU: Intel(R) Core(TM) i5-10500 CPU @ 3.10GHz [13%]
RAM: 3.80G/15.7G

 

[wittaj]

Yeah that machine is capable.

You are not using the substreams option. I am on a 4th generation with way more cameras than you and sit at lower CPU than you do with a 10th generation CPU.

Start there by utilizing the substreams and see if that improves your time. My 4th generation DS analysis is aroun 300ms, so on your machine you should be in the 50ms range, but no more than 100ms and you are currently over 15,000ms.

 

[ghostwalker42]

Thank you for the advice, I made the sub stream changes and my CPU is at 2 or 3% now. That is a big change. As for the DS, is their any configs needed other then just running the install and starting the service. I do see a few powershell scripts to setup docker CPU and generate windows setup. Also in the log windows I do see that the DS keeps getting restarted? is their another log file I can check for errors?

 

[DG99]

Did you change the default port for deepstack? I see you are using 82. Try this goto BI setting-AI and stop deepstack.
Open powershell run as admin and paste this command to start
deepstack --VISION-DETECTION True --PORT 82