BI 4.3.3 demo.. with two amcrest 721 cameras, lost video just after trigger.

S

sdetweil

Young grasshopper
Sep 7, 2016
47
1
I am trying to figure out how to close the gap from trigger to video recording..

I set the buffer at 10 seconds, thinking it would then 'save' this with the recording started on trigger. I have trigger delay set to 0.

just trying ot make sure I get as much recorded as possible.. a few seconds sadly might make a difference
 
thanks.. I already have pre-trigger buffer set to 10 seconds.. the help says it may not be possible without direct to disc recording..
 
thanks.. I really had to dial the sensitivity up and the detection size (pixels moved) down. then the detection/trigger happened and the pre-trigger buffer was applied. my test was to hide behind a pillar and come out and do something. before I just suddenly appeared holding a book.. now you see me come out from behind the pillar and pick up the book.
 
You must log in or register to reply here.
Top Bottom