best way to cool down my HP EliteDesk 800 G3 SFF?
- Thread starter tung256
- Start date
63% for CPU seems awfully high for a i7 7th gen.
Did you exclude BI and associated video from antivirus?
Are you using the computer for anything else?
Did you do all the optimizations in the wiki ? Substreams and direct to disc is a must.
Is the fan clean?
Did you exclude BI and associated video from antivirus?
Are you using the computer for anything else?
Did you do all the optimizations in the wiki ? Substreams and direct to disc is a must.
Is the fan clean?
mat200
IPCT Contributor
- Jan 17, 2017
- 16,127
- 27,089
in my experience, in addition to blowing out the dust and checking the fan,
sometimes the heatsinks need to be removed and the thermal paste replaced, and the heatsink reinstalled.
sometimes the heatsinks need to be removed and the thermal paste replaced, and the heatsink reinstalled.
Flintstone61
Known around here
This is a Dell precision 3630 tower running BI with 6 cores and 12 threads. in an air conditioned basement with 8-9 cams. factory stock was 2 case fans.
My HP Elitedesk g4-800 SFF i5-8500 ran in the 80's most of the time with 15-18 cams. still going 2 years later. running in an uncooled workshop. with 4" boiler pipes running across the ceiling at 150F.
My HP Elitedesk g4-800 SFF i5-8500 ran in the 80's most of the time with 15-18 cams. still going 2 years later. running in an uncooled workshop. with 4" boiler pipes running across the ceiling at 150F.
