Bad picture quality

[Lorenzo Warren]

I originally purchased a lorex system with a lorex 9163x and 8 lnr 9232 camera well I been dealing with grainy video noise I've had a replacement nvr sent to me changed ethernet cable and changed power supply, purchase greenwave emf filter to plug in my outlet and even bought some higher quality cameras from Andy and its still showing the same way I was wondering if you good folks could give me some troubleshooting ideals

 

[mat200]

Hi @Lorenzo Warren

Please find a way to download a clip of the image and provide the original image instead of photos from the monitor. As it is it is difficult to determine how much issues we are seeing from the monitor.

 

[Lorenzo Warren]

Ok

 

[Lorenzo Warren]

Here's a video

 

[IAmATeaf]

Here's a video

You need to link to the video.

 

[EMPIRETECANDY]

From my view the nvr defective.

 

[Lorenzo Warren]

Ok thanks for the reply

 

[IAmATeaf]

The NVR has already been swapped hasn’t it?

 

[Lorenzo Warren]

Yes lorex sent me a replacement and it still showed the same way I just sent it back I purchased some starlight camera from Andy and the quality didn't improve so I just purchased the dahua 5216 hopefully that solves the problem

 

[c hris527]

What type of Monitor are you using to view that with, looks like your resolution is way down and you are viewing in sub stream.

 

[Lorenzo Warren]

I am using a 4k television and I not sure what a sub stream is

 

[c hris527]

This Might help -->

 

[looney2ns]

You need to make sure that.
1-correct resolution is set in the camera.
2-need to make sure output resolution is set correctly in the nvr for your TV.
3-make sure you're using the main stream from the cam.
4-hook a standard 1080p monitor to the NVR to check instead of the 4k.
This is likely user error.

 

[c hris527]

This is likely user error.[/QUOTE]
Without a Doubt