Axis M1124 Can't connect

Dazcomputers

Dazcomputers

Getting the hang of it
Sep 12, 2017
169
62
milwaukee
Ok I added jpg's of all screens. This is my first Axis camera and I'm having trouble connecting it to Blue Iris.
I have logged in using the axis IP utility and assigned an IP to the camera. I added a password to users and onvif in the axis web menus. I choose RTSP in the camera configuration with the user and password that I set up in the axis web interface. Not sure what I'm missing. I have a few dahua cameras and q-see cameras that are seen no problem. I'm getting a RTSP 404 not found screen with no signal. Any help is awsome.
 

Attachments

  • Axis IP Utility.jpg
    Axis IP Utility.jpg
    20.4 KB · Views: 7
  • Axis TCP-IP web setup.jpg
    Axis TCP-IP web setup.jpg
    68.7 KB · Views: 7
  • Axis User setup.jpg
    Axis User setup.jpg
    52.3 KB · Views: 6
  • Configuration tab.jpg
    Configuration tab.jpg
    64.3 KB · Views: 6
  • Inspection tab.jpg
    Inspection tab.jpg
    28.8 KB · Views: 5
  • ONVIF User screen.jpg
    ONVIF User screen.jpg
    40.2 KB · Views: 5
  • RTSP configuration tab.jpg
    RTSP configuration tab.jpg
    63.7 KB · Views: 5
  • Video tab.png
    Video tab.png
    26.4 KB · Views: 5
Dazcomputers said:
Ok I added jpg's of all screens. This is my first Axis camera and I'm having trouble connecting it to Blue Iris.
I have logged in using the axis IP utility and assigned an IP to the camera. I added a password to users and onvif in the axis web menus. I choose RTSP in the camera configuration with the user and password that I set up in the axis web interface. Not sure what I'm missing. I have a few dahua cameras and q-see cameras that are seen no problem. I'm getting a RTSP 404 not found screen with no signal. Any help is awsome.
Click to expand...
Disable hardware acceleration for tgth camera and start again
 
Ok I reset the Axis camera to factory and tried this with no luck. Not sure what Im missing here. I can still log in and see the live view through axis web interface with no issues. I'm missing some setting somewhere.
 

Attachments

  • 1 Hardware Accleleration.jpg
    1 Hardware Accleleration.jpg
    60.9 KB · Views: 9
  • 2 Inspect RTSP.jpg
    2 Inspect RTSP.jpg
    26.7 KB · Views: 8
  • 3 No Signal.jpg
    3 No Signal.jpg
    24.2 KB · Views: 7
  • 4 RTSP configuration tab.jpg
    4 RTSP configuration tab.jpg
    62.9 KB · Views: 8
  • 5 Hardware Acc.jpg
    5 Hardware Acc.jpg
    72.5 KB · Views: 9
Dazcomputers said:
Ok I reset the Axis camera to factory and tried this with no luck. Not sure what Im missing here. I can still log in and see the live view through axis web interface with no issues. I'm missing some setting somewhere.
Click to expand...
dont use the rtsp from the dropdown...use http and the m series h264.
 
  • Like
Reactions: Dazcomputers
Ok I got it to work with that. Thank You. Could you please explain briefly the difference between using the rtsp and the http. What is it doing or looking for between the two. On my Dahua and Qsee cameras the rtsp works everytime. Also I never had to select the actual make and model before. Great learning once again. And seriously man big respect to you for all you do. Since getting involved with this site and you and everyone else that teaches on here my skills have not stopped increasing.
 
You must log in or register to reply here.
Top Bottom