Auto tracking ptz ip camera and MINI PTZ IP Camera Update file

[vasycara]

So I need this firmware IPNC_S2l2.0.1_build201607221508.

But the question is, How can I use this firmware upload.
Batchcontrol can not find my camera.
If I want to upload the firmware through the camera.
I get determine the upgrade. upgrade fail.
Can anyone tell me what I do wrong

Here's user manual for mini IP PTZ camera.See page 14 for firmware updates.

 

[chicca01]

I login in the camera IE11.
I go to device update.
I go to upgrade file.
I put the zip file into it and press upgrade.
camera says. determine the upgrade.
upgrade failed

 

[vasycara]

I login in the camera IE11.
I go to device update.
I go to upgrade file.
I put the zip file into it and press upgrade.
camera says. determine the upgrade.
upgrade failed

Try with another PC.
IP Camera be connected via a router, not directly to PC.

 

[chicca01]

I've tried it with an hp laptop and a dell desktop.
And through the router switch modem. There is nothing to find.

But via the internet explorer. and uc software.
the camera is found.

 

[vasycara]

I've tried it with an hp laptop and a dell desktop.
And through the router switch modem. There is nothing to find.

But via the internet explorer. and uc software.
the camera is found.

In Internet Explorer should be able to make firmware updates.

 

[chicca01]

on internet explorer
determine the upgrade.
upgrade failed.
What am I doing wrong. or does the camera locked for an upgrade.

On the uc software I have tried.
but then he is still on 0% upgrade and doesn't do anything.

I have given the camera a reset
the SADPTOOL find the camera as well. but I can not login with admin.
12345.123456.

Or should I use the original software cd of the camera.
Because then I have a problem. that is broken

 

[vasycara]

on internet explorer
determine the upgrade.
upgrade failed.
What am I doing wrong. or does the camera locked for an upgrade.

On the uc software I have tried.
but then he is still on 0% upgrade and doesn't do anything.

I have given the camera a reset
the SADPTOOL find the camera as well. but I can not login with admin.
12345.123456.

Or should I use the original software cd of the camera.
Because then I have a problem. that is broken

If you're not logged in as an admin can not do firmware updates.
This is because you can not update.
You have to log in as admin, and everything will be ok.

 

[chicca01]

What I am trying to explain.
I can log in to IE11.
And UC software.
On uprgade ie11 I get into fail.
On uc software upgrade keep stand on 0% Sadp find my camera but can not login to sadp.
Batchcontrol.exe can not find my camera.
What am I doing wrong

 

[vasycara]

What I am trying to explain.
I can log in to IE11.
And UC software.
On uprgade ie11 I get into fail.
On uc software upgrade keep stand on 0% Sadp find my camera but can not login to sadp.
Batchcontrol.exe can not find my camera.
What am I doing wrong

If you did reset the IP address 192.168.0.99 cam has now.
The router must have the address 192.168.0.1 to be in the same network..If is visible in SADP ip cam, can change ip address, to be in the same network router.
After reset ip cam should have admin and admin pass.
Well read user manual.

 

[chicca01]

Everything you have explained is true exactly.
He sits in the same network. but it's just not gonna work.

User,s manual I have is for a v 3.1. There is nothing in about upgrading or network.
I have a v2.4.4

 

[chicca01]

If you did reset the IP address 192.168.0.99 cam has now.
The router must have the address 192.168.0.1 to be in the same network..If is visible in SADP ip cam, can change ip address, to be in the same network router.
After reset ip cam should have admin and admin pass.
Well read user manual.

I think I've found the problem.
My gateway has a static ip 192.168.2.xxx.
Camera ip 192.168.0.99.
Can this be the problem.,, I've also done port forwarding IPv4.
But the Batchcontrol Exe. does not find the camera

 

[vasycara]

I think I've found the problem.
My gateway has a static ip 192.168.2.xxx.
Camera ip 192.168.0.99.
Can this be the problem.,, I've also done port forwarding IPv4.
But the Batchcontrol Exe. does not find the camera

In SADP, you can change the ip address ip cam.
put 192.168.2.99 for IP cam with SADP

 

[chicca01]

In SADP, you can change the ip address ip cam.
put 192.168.2.99 for IP cam with SADP

Thank you ... I didn't know that. I am again a bit further.
But where do we go from here.
Batch tool can still find anything

 

[vasycara]

Thank you ... I didn't know that. I am again a bit further.
But where do we go from here.
Batch tool can still find anything

You do not need batch tool.
You can change the ip in SADP

 

[chicca01]

You do not need batch tool.
You can change the ip in SADP

I have done it.
What I do now?

 

[vasycara]

I have done it.
What I do now?

 

[chicca01]

This

 

[chicca01]

Sorry

 

[vasycara]

This

DNS address is not good.
put 192.168.2.1
put HTTP port 81

 

[chicca01]

Http// port 80 Can not be changed.