Aspect ip camera issue

[naumanakram]

Hi all, i have installed 6 up cameras at my premises three are directly connected and three are connected through poe switch, now i have changed the ip address of cameras which are connected to poe switch and dhcp in both nvr and camera is disabled but again once i connect the cable from poe switch to nvr poe connector the three cams get the same ip if someone can help me in this

Sent from my M2004J19C using Tapatalk

 

[feropi]

If I understand well:

• You disabled DHCP servers.
• You set IP addresses manually, in the camera configuration and pointed the NVR to the cameras.
• The POE switch is connected to an internal port in the NVR.

Is this correct?

What brand and model are the NVR, switch an cameras? Last picture is blurry. Is that from a client or from the monitor?