Yes, it does. Then, you have all of the gains to adjust, sensitivities andother functions. I thought I had all of mine setup and working very well in the daytime. When night time came, it was a whole other game. Moths fly by, bats, owls and such. Then, the IR is so powerful on the Speed dome, the PTZ in the carport would see it's beam move when the speed dome was going back to home, which sent a trigger and sent the speed dome back to it's secondary triggered zone. It's a fine line of dancing, adjusting, looping, tweaking, holding your breath, cussing at it and then finally scraping the whole pattern and starting all over again before you finally find the sweet spot where everyone plays nice with each other.I feel your pain. Once you go to multiple zones and presets with multiple spotters, things can get weird fast! It takes some noodling to figure out all the scenarios..
Bourbon....Rye Whiskey....I had both! I usually come up with my best ideas while sipping 3 fingers neat. I quit overthinking everything!!You forgot the bourbon, that was the problem
Hahaha, it took me a couple minutes to figger out what you were referring toHow old is too old to dye your hair that color?
Do you use Idle Motion or Time Task to return PTZ camera to its home preset?Yes and 2 presets.
This was actually a complicated setup and many bourbons were consumed over months to get it working right.
Notice when they first stopped it decided to go back to its preset as it didnt sense any more movement (Something that is quite aggravating, there should be a dwell time setting) Once back at preset it picked up movement again and tracked again.
That first video is actually preset 2 not its "home". Its home preset is zoomed further up the street. Another fixed 5442 watches the actual turn around, and acts as a spotter for the PTZ in case something slips by its initial tracking at preset #1
You need to use time task to get it to return to its “home” preset position after being called away by a spotter cam to a different preset.@
Do you use Idle Motion or Time Task to return PTZ camera to its home preset?
What AutoHome value do you use?You need to use time task to get it to return to its “home” preset position after being called away by a spotter cam to a different preset.
How do you get the ptz to move to a certain preset, 2 for example? I cloned a spotter cam with B>C zone to try and trigger my ptz1 that doesn't have auto tracking. I need it to move to preset2 from its home, preset1. It's on a schedule so it will move back to home. I cloned it to give it ability to go from 1to 2 when it gets triggered through its own zones.But you can do this with Blue Iris as well!
I have several spotter cams doing this exact thing, and get instances where the person stops from the original spotter cam and the PTZ goes back to the preset, and then another spotter picks them back up and swings the PTZ to another preset.
See this thread I made.How do you get the ptz to move to a certain preset, 2 for example? I cloned a spotter cam with B>C zone to try and trigger my ptz1 that doesn't have auto tracking. I need it to move to preset2 from its home, preset1. It's on a schedule so it will move back to home. I cloned it to give it ability to go from 1to 2 when it gets triggered through its own zones.