Another can't access from WAN thread

42etus

n3wb
Sep 16, 2014
21
4
As the title says I can't access BI from the web. I have run the Remote Access Wizard and get green check marks on all pages except the Remote Access Test page. I get the error "401:unauthorized". Port forwarding is set up correctly and port checkers show the port (8501 in my case) to be open. I have no problem accessing BI from other computers and my cell phone while on my LAN so that tells me user names and passwords are correct. I have gone as far as temporarily turning off my firewall. No joy. Blueiris.exe is listed in the firewall allowed programs.

I've searched both this forum and the web and tried suggestions others with this problem have received. None solved my problem. The "401:unauthorized" message really puzzles me.

Any help would be much appreciated!
 
As the title says I can't access BI from the web. I have run the Remote Access Wizard and get green check marks on all pages except the Remote Access Test page. I get the error "401:unauthorized". Port forwarding is set up correctly and port checkers show the port (8501 in my case) to be open. I have no problem accessing BI from other computers and my cell phone while on my LAN so that tells me user names and passwords are correct. I have gone as far as temporarily turning off my firewall. No joy. Blueiris.exe is listed in the firewall allowed programs.

I've searched both this forum and the web and tried suggestions others with this problem have received. None solved my problem. The "401:unauthorized" message really puzzles me.

Any help would be much appreciated!
blue iris options >users
Make sure lan only is not selected.
 
LAN only is not selected.

It's the "401:unauthorized" error message on the remote access test page that really stumps me.
 
OK, I deleted the user, then added it back leaving LAN only unselected......no joy. I still get "401:unauthorized" on the remote access test page.
I have also shut down and restarted the computer several times. Didn't help.
 
OK, I deleted the user, then added it back leaving LAN only unselected......no joy. I still get "401:unauthorized" on the remote access test page.
I have also shut down and restarted the computer several times. Didn't help.
make sure https is not selected in your app or used in your web address...
Also make sure upnp was not setup in your router, disable it.
Other than that I would email support and see what he says.

Also are you actually checking from a remote location and/or with the wifi turned off on your phone?
 
Not using https in my phone app
Not using upnp in the router
Have tried my phone from a remote location with wifi off

None of that has helped

What I'm really stuck with is the "401:unauthorized" error message that BI gives me on the Remote access test page. That doesn't even involve my phone.