Annke WPT400 (I81CK) RTSP URL

[bernd0815]

Hello,

I bought an Annke WPT400 (I81CK) IP Camera. The camera itself is working fine but I try to connect it to shinobi.
Shinobi finds the camera asks for ONVIF info and gets the info back.

My problem is that the RTSP URL provided via ONVIF is only valid for some minutes and changes constantly. The URL looks like that: rtsp:/192.168.178.227:554/live/1jfiegbr2xxx_p0_AJPHMGHLCGVR

Is there a possibility to find out the correct, steady stream URL? Or is there a possibility to make shinobi request the new URL constantly?

Kind regards,

Bernd

 

[TonyR]

Assuming ONVIF has been enabled in the cam:

• Install ODM, open it, find your camera in the left column, click on it and log in with the cam's username and password.
• In the 2nd white column from the left find "Live Video" and click on it.
• If you get live video OK on the right, note the URL at bottom right of screen.

 

[bernd0815]

Hi,

yes, your assumption is correct. ONVIF is enabled. Unfortunately i try to find a download source for ODM since yesterday in the evening. The download on SourceForce is disabled. Is there any other source?

Kind regards,

 

[bernd0815]

Ok. After I posted my reply I found a source that was not availiable yesterday.

When I press on "LIveVideo" everytime the URL changes.

rtsp:/192.168.178.227:554/live/1jfiegbr2xxxx_p0_IOQILFZHYSIC
rtsp:/192.168.178.227:554/live/1jfiegbr2xxxx_p0_FPIYMWUFDFLA
rtsp:/192.168.178.227:554/live/1jfiegbr2xxxx_p0_POZXCQHNXJWV

But somehow it must be possible to get a constant stream from the camera because the chinese app (Myannke) also gets a constant string...

Kind regards,

Bernd

 

[swdavis90]

Bernd,

Did you ever find a resolution? I seem to be running into the same issue with the same camera.