djmandrukkj
n3wb
Hi, I'm new to the forum and first of all I apologize for my English, I'm using Google Translate.
I'll explain my problem, I have an ANNKE I91BM camera, which didn't go online when I restarted the NVR, I tried to reset the camera from the button by holding it down for 10 seconds, but nothing happened, after which the 'I disassembled it is connected directly to the router by feeding it with a separate power supply, and I noticed that it is seen by the SADP program, giving me an ip address: 192.168.1.64 and it does not let me apply the changes to the port or I insert the change of the http port and also of the 'ip but when the SADP is refreshed the same address returns again and the http port disappears again, I am attaching a screenshot.
I did a lot of research on this forum and I did various tests but in vain, does anyone have an idea of how to bring this camera back to life? Thank you
I'll explain my problem, I have an ANNKE I91BM camera, which didn't go online when I restarted the NVR, I tried to reset the camera from the button by holding it down for 10 seconds, but nothing happened, after which the 'I disassembled it is connected directly to the router by feeding it with a separate power supply, and I noticed that it is seen by the SADP program, giving me an ip address: 192.168.1.64 and it does not let me apply the changes to the port or I insert the change of the http port and also of the 'ip but when the SADP is refreshed the same address returns again and the http port disappears again, I am attaching a screenshot.
I did a lot of research on this forum and I did various tests but in vain, does anyone have an idea of how to bring this camera back to life? Thank you
