Hi,
I just got the Amcrest IP3M-954EB and set it up in Blue Iris 4. I let BI4 auto detect the camera and it works good as Make:Generic Model:RTSP H.265/MJPG/MPEG4. My problem is I cannot seem to get the BI PTZ to control the brightness, shutter, etc.
When I access these settings in the web page for the camera I can control the setting from there. I can issue the reboot device command from the PTZ selection in BI4 and that works but nothing else from the PTZ selection. I understand that the camera does not do Pan and Tilt but that seems to be where the exposure controls are.
Is there a camera profile in the PTZ/Control tab that will allow these adjustments? I am currently setting it for Amcrest H.264 and the box is checked for Use another ip/port which is set to 9292 (the port the camera is set for in the video tab).
Help is appreciated.
I just got the Amcrest IP3M-954EB and set it up in Blue Iris 4. I let BI4 auto detect the camera and it works good as Make:Generic Model:RTSP H.265/MJPG/MPEG4. My problem is I cannot seem to get the BI PTZ to control the brightness, shutter, etc.
When I access these settings in the web page for the camera I can control the setting from there. I can issue the reboot device command from the PTZ selection in BI4 and that works but nothing else from the PTZ selection. I understand that the camera does not do Pan and Tilt but that seems to be where the exposure controls are.
Is there a camera profile in the PTZ/Control tab that will allow these adjustments? I am currently setting it for Amcrest H.264 and the box is checked for Use another ip/port which is set to 9292 (the port the camera is set for in the video tab).
Help is appreciated.