Amcrest AD110 ONVIF with Dahua NVR?

[Patrick845]

I don't know what I am doing wrong, but I am losing the few hairs I have left.

I have an AD110 and can read the rtsp stream with VLC without any problem, however I can not add it to my Dahua DHI-NVR5232-4KS2 nvr.

The ONVIF settings on the NVR are quite sparse as it only let me chose an IP address and ports for rtsp and http, in addition to the login/password.



Has anyone been able to add this doorbell to a Dahua NVR?

 

[Patrick845]

Answering my own post:
the nvr has problem with complex password, by dumbing it down I had it working with the following settings:
manufacturer: private
port: 37777
username: admin
password: xxxx

 

[Flintstone61]

I finally decided to FAFO if this AD110 still works.
Low and Behold the Mfckr has been recording away on its own and somehow reconnected itself to the WIFI. Recent Power Outage maybe? who knows.
I got mine connected to the NVR using the NVR's admin USER/Pass even though it is setup in Amcrest Smarthome with a different PWD.
I also have it up now in Blue Iris with the NVR USER/Pass. Why? i don't know. It didn't like the Amcrest PWD.
Also it will stream into BI via HTTP or Rstp ( shown is the Rstp selection.
When I chose manually, the ( Amcrest) model and the make AD110..it goes NO Signal. go figure.
Also i stumbled onto an Amcrest youtube channel, it has a self help video for the same purpose.