Accessing Camera GUI

S

Sybaris

Young grasshopper
Jun 23, 2014
62
3
My current setup is Cameras>NVR>PC (IVMS-4200)

MY NVR does all the recording. IVMS on my PC only "sees" the NVR and I can adjust some camera settings using IVMS. I would like to access the camera web GUI to get to all of the settings from the PC but not sure how to do it. I'm guessing that in addition to the cameras IP address I have to have some extra doo-dads in the address to get to it???

thanks
 
I didn't see mention in your signature of the model NVR, but when you log into the NVR's webGUI, on the camera status/edit page, over to the right on each camera line, is there a blue 'e' ? if so, try clicking on that. That should launch a browser and open the cam's webGUI.

From what I understand, you're correct in that in most cases a POE NVR operates a virtual server where the cam's are on a subnet unlike the subnet for the PC's and NVR's LAN segment.

I've set up 3 or 4 NVR's over the last few years but mostly a dozen PC's running Blue Iris VMS so I'll be the first to admit that NVR's are not my strong suite.
 
TonyR said:
I didn't see mention in your signature of the model NVR, but when you log into the NVR's webGUI, on the camera status/edit page, over to the right on each camera line, is there a blue 'e' ? if so, try clicking on that. That should launch a browser and open the cam's webGUI.

From what I understand, you're correct in that in most cases a POE NVR operates a virtual server where the cam's are on a subnet unlike the subnet for the PC's and NVR's LAN segment.

I've set up 3 or 4 NVR's over the last few years but mostly a dozen PC's running Blue Iris VMS so I'll be the first to admit that NVR's are not my strong suite.
Click to expand...

Thanks!
It's a Hik NVR. It's in my sig now.
Never tried that, accessing the NVR GUI. I don't see the blue e though. I can get to individual camera settings through the NVR webGUI but, just as with IVMS, not as much as if you pull up a cameras individual webGUI.
 
I figured it out.
On the Hik NVR webGUI it's Configuration>System>Camera Management>IP Camera
A table pops up with all the cameras. The last column is labeled Connect and has each cameras address amended with additional numbers. That will take me to the individual camera webGUI.
 
  • Like
Reactions: TonyR
Last edited:
  • Like
Reactions: alastairstevenson
You must log in or register to reply here.
Top Bottom