Access poe camera

Gurkut

Gurkut

n3wb
May 23, 2021
20
6
Cyprus
Dear friends,
Before (2 days ago) i can access my camera interface with internal ip with click to blue e icon inside dvr interface (please check photo) now i cannot. my internal network is starting with 192.168 .2.* but NVR is giving ip with 10.1.1.* what is way to connect poe camera in internal network ?
 

Attachments

  • Screenshot 2021-05-25 14.15.59.png
    Screenshot 2021-05-25 14.15.59.png
    20 KB · Views: 16
The NVR assigns the cameras a 10.1.1.X IP range. That is perfectly normal.

The only way to access them is through the NVR e icon.

Or disconnect them from the NVR and add to a POE switch, but then you are asking for trouble when going back to NVR.
 
wittaj said:
The NVR assigns the cameras a 10.1.1.X IP range. That is perfectly normal.

The only way to access them is through the NVR e icon.

Or disconnect them from the NVR and add to a POE switch, but then you are asking for trouble when going back to NVR.
Click to expand...
strange but it was working just 1 or 2 days ago. now when i click blue e button. page wont display
 
Can you post a picture of your camera registration page where the camera IPs and the blue IE icon is at?

sorry, ok I see it now.

what is your NVR model #?

The ports for the cameras are wrong. Looks like they were added manually.

unplug the cameras, delete the entires for them on that page, then plug them back in one by one and wait. Do not try to add them manually. Let the NVR add them to the bottom by itself.
 
  • Like
Reactions: SouthernYankee and sebastiantombs
bigredfish said:
Can you post a picture of your camera registration page where the camera IPs and the blue IE icon is at?

sorry, ok I see it now.

what is your NVR model #?

The ports for the cameras are wrong. Looks like they were added manually.

unplug the cameras, delete the entires for them on that page, then plug them back in one by one and wait. Do not try to add them manually. Let the NVR add them to the bottom by itself.
Click to expand...

Hi, My NVR model is DAHUA NVR4216-16P-4KS2 with lastest firmware. I will try your way this afernoon.
 
bigredfish said:
Can you post a picture of your camera registration page where the camera IPs and the blue IE icon is at?

sorry, ok I see it now.

what is your NVR model #?

The ports for the cameras are wrong. Looks like they were added manually.

unplug the cameras, delete the entires for them on that page, then plug them back in one by one and wait. Do not try to add them manually. Let the NVR add them to the bottom by itself.
Click to expand...

Hello, I try your way something changed. Now when i click on dahua blue camera e icon opening page is http://Nvrip:dahuacamera port. that is ok and working but when i click oem camera blue e icon ( i mean its another brand) its opening . i will attach new ss.

thanks

Screenshot 2021-05-26 22.17.11.png
 
Last edited:
Yes I see the Dahua camera worked as i mentioned. Good.

As to the OEM brand camera, I honestly dont know.

You may try using the Edit icon (pencil) for that camera. See screen shots below. You can choose a different manufacturer, or Onvif, and you might first try changing the port to that 8899. Remember, this Edit box doesnt actually change any setting on the camera. It simply tells the NVR how to communicate with it

edit-camera2.jpg edit-camera1.jpg
 
  • Like
Reactions: Gurkut
You must log in or register to reply here.
Top Bottom