About 1/3 say unable to open ...

RogMan

RogMan

Young grasshopper
Nov 2, 2015
65
2
Now I have started getting"unable to open file 800000002".
I have installed the klite codec file from BI but it is still happening to about 1/3 of my clips. I don't even know if the klite is working.
It is on different cameras at different times.
Any ideas?
Roger
 
I guess "bump it" means try again.
I am having this problem still and maybe getting worse. Still always random so that make it hard to diagnose,
Has anyone had this problem or know whats wrong?
Thanks,
Roger
 
RogMan said:
I guess "bump it" means try again.
I am having this problem still and maybe getting worse. Still always random so that make it hard to diagnose,
Has anyone had this problem or know whats wrong?
Thanks,
Roger
Click to expand...
Are you recording to bvr or mp4?
are you recording to NAS? or some other attached storage?
 
bvr.
recording to 500GB drive, attached
I do not use alerts, only clips. I have db auto set to maintain at 2 AM. I have forced the rebuild but no help.
This is the HP you recommended last year with Intel graphics. Works great except for this problem and I don't think the problem is the computer. I actually think it is getting worse but maybe because I have had to look at some of the videos. Probably 60% fail on all cameras at different but never the same ones.times. The only thing I have noticed is when it happens, it always shows the length of the clip to be 00 seconds. Not running as service. I installed Klite codec but did not configure codec because I would probably screw that up since I couldn't find the info on how to do it.
Roger
 
RogMan said:
bvr.
recording to 500GB drive, attached
I do not use alerts, only clips. I have db auto set to maintain at 2 AM. I have forced the rebuild but no help.
This is the HP you recommended last year with Intel graphics. Works great except for this problem and I don't think the problem is the computer. I actually think it is getting worse but maybe because I have had to look at some of the videos. Probably 60% fail on all cameras at different but never the same ones.times. The only thing I have noticed is when it happens, it always shows the length of the clip to be 00 seconds. Not running as service. I installed Klite codec but did not configure codec because I would probably screw that up since I couldn't find the info on how to do it.
Roger
Click to expand...
what does "attached" mean..how?
if you record to bvr you dont need any codec...
 
Might be the wrong terminology. I have the Windows 10 64 bit installed on a 256 GB SSD. I have the BI clips being recorded on a 500GB rotational drive.
 
RogMan said:
Might be the wrong terminology. I have the Windows 10 64 bit installed on a 256 GB SSD. I have the BI clips being recorded on a 500GB rotational drive.
Click to expand...
is the drive inside the pc? make sure windows is set to high performance and the drive is set to never sleep...delete the DB folder and restart BI...
 
Yes, it is inside.
Changed to High Performance and never to sleep.
Deleted db and rebooting.
Hope, this is it. Will try it and will let you know.
Thanks,
Roger
 
You might have a failing hard drive. Run Seagate SeaTools or WD Data Lifeguard Diagnostic to rule that out.
 
The drive passed all tests and I contacted Ken and he said might be file error but I tried the things he said and they were all ok. I think I have it narrowed down but don't know ho to fix it. I have all 9 cameras set to record at 12 FPS. 7 of them will run this during the day( have to check further as to why all are not but that is a different problem I think) but when night comes and IR turns on, they drop to 2 - 3fps. This is when I am getting 95% of my problem. I have looked at all setups but cannot find where a setting is for FPS to drop when IR turns on.
I am getting this info from the status/ camera tab.
Roger
 
RogMan said:
The drive passed all tests and I contacted Ken and he said might be file error but I tried the things he said and they were all ok. I think I have it narrowed down but don't know ho to fix it. I have all 9 cameras set to record at 12 FPS. 7 of them will run this during the day( have to check further as to why all are not but that is a different problem I think) but when night comes and IR turns on, they drop to 2 - 3fps. This is when I am getting 95% of my problem. I have looked at all setups but cannot find where a setting is for FPS to drop when IR turns on.
I am getting this info from the status/ camera tab.
Roger
Click to expand...
What brand of cameras?
You cannot adjust the fps in blue iris, the adjustment has to be made in the camera...a camera that drops to 2fps at night is junk...
 
1 Huisun, 1 Empire,1 Nelly and the rest is Enster. I know BI will not force this and I admit I have had my share of problems getting to use IE 11 to get into any of the camera's interface but I have been trying to get around it by using ONVIF. You are right, 2fps at night is junk. For me, it is nothing. Nothing will record which takes me back to my original problem.
 
RogMan said:
1 Huisun, 1 Empire,1 Nelly and the rest is Enster. I know BI will not force this and I admit I have had my share of problems getting to use IE 11 to get into any of the camera's interface but I have been trying to get around it by using ONVIF. You are right, 2fps at night is junk. For me, it is nothing. Nothing will record which takes me back to my original problem.
Click to expand...
is every camera dropping to 2fps?
How are you powering the cams?
 
Right now it all but 3, the 3 are: 1-ENster, 1- Nelly and 1 Empire. At this minute they are running 12-13fps.
 
You must log in or register to reply here.
Top Bottom