3D printed base for installing PFA130-E on Diamond rib steel with 6" centers.

[dudemaar]

Not as cool or complex as the dual camera mount, but figured I'd make a post on my recent 3D printing project.

Seen this on a site where a professional company installed cameras on a shop. I have run into this issue myself many times installing.




My solution, purchased a cheap 3D printer on sale, designed a part using Onshape and started printing.

After a few prototypes and revisions, this is what I came up with. Now with 30% infill and a 6.5hr print.




STL File for anyone who wants to print it.

 

[Ckb3]

Thats awesome work! Would you be willing to share the file?

 

[TonyR]

Beautiful!
What did you use for the black, squishy gasket between your mount and the metal siding?

 

[guykuo]

You got a printer TO do the project? That is some next level initiative.

 

[dudemaar]

You got a printer TO do the project? That is some next level initiative.

lol, not really. I've always wanted one and when I seen the Ender v3 on sale for $200 Canadian I decided to get one. I am also printing lots of cool toys for my 7yr son, plus some packout mods. It's never ending, Wishing I got into this years ago.

 

[dudemaar]

Beautiful!
What did you use for the black, squishy gasket between your mount and the metal siding?

https://www.amazon.com/NATGAI-Neoprene-Adhesive-Multiple-Dimensions/dp/B07W3XD26L/ref=sr_1_1?crid=2Y3DMFAJXCH8R&keywords=NATGAI+Sponge+Neoprene+with+Adhesive+Foam+Rubber+Sheet%2C+Cut+to+Multiple+Dimensions+and+Lengths+-+DIY%2C+Gaskets%2C+Cosplay%2C+Costume%2C+Crafts+%281%2F4%E2%80%9D+Thick+X+12%E2%80%9D+Wide+X+54%E2%80%9D+Long%29&qid=1705803866&sprefix=natgai+sponge+neoprene+with+adhesive+foam+rubber+sheet%2C+cut+to+multiple+dimensions+and+lengths+-+diy%2C+gaskets%2C+cosplay%2C+costume%2C+crafts+1%2F4+thick+x+12+wide+x+54+long+%2Caps%2C109&sr=8-1

https://www.amazon.com/JINGMEI-Biscuit-Graduated-Stainless-Cutters1inch/dp/B0BPYGX4KP/ref=sr_1_2?crid=25BMC1ZUQU30R&keywords=ShengHai%2B12%2BPiece%2BRound%2BCookie%2BCutter%2BSet%2C%2BDonut%2BCutter%2BSet%2C%2BStainless%2BSteel%2BCircle%2BFondant%2BMolds%2Bfor%2BDough%2BPastry%2BBiscuits%2BEnglish%2BMuffins&qid=1705803961&sprefix=shenghai%2B12%2Bpiece%2Bround%2Bcookie%2Bcutter%2Bset%2C%2Bdonut%2Bcutter%2Bset%2C%2Bstainless%2Bsteel%2Bcircle%2Bfondant%2Bmolds%2Bfor%2Bdough%2Bpastry%2Bbiscuits%2Benglish%2Bmuffins%2Caps%2C102&sr=8-2&th=1

using the 3-3/4 inch

 

[dudemaar]

Thats awesome work! Would you be willing to share the file?

Not exactly sure how, but ya I can share it. won't let me upload the gcode file to my post.

 

[weigle2]

Awesome work! I've been wanting to 3D print an angled base for mounting PTZ cameras like the SD22204UE-GN. The tracking is a little off when mounted to a soffit with about a 10 degree angle. I haven't been able to find a Dahua or other manufacturer mount that allows this.

 

[guykuo]

Don't upload the Gcode. That is specific to just the exact same make/model of printer.
Upload your STL file. You will need to archive it to .zip format first. Forum accepts .zip files

 

[CanCuba]

Awesome work! I've been wanting to 3D print an angled base for mounting PTZ cameras like the SD22204UE-GN. The tracking is a little off when mounted to a soffit with about a 10 degree angle. I haven't been able to find a Dahua or other manufacturer mount that allows this.

Check this site out. They have exactly what you need:

"dahua" 3D Models to Print - yeggi

84 "dahua" printable 3D Models. Every Day new 3D Models from all over the World. Click to find the best Results for dahua Models for your 3D Printer.

www.yeggi.com

IP cam mounting DAHUA by haniacik

Mounting on pitched roof (16 degree) for Dahua Speed Dome Camera SD22404T-GN-W 4MP .

www.thingiverse.com

 

[weigle2]

Check this site out. They have exactly what you need:

"dahua" 3D Models to Print - yeggi

84 "dahua" printable 3D Models. Every Day new 3D Models from all over the World. Click to find the best Results for dahua Models for your 3D Printer.

www.yeggi.com

IP cam mounting DAHUA by haniacik

Mounting on pitched roof (16 degree) for Dahua Speed Dome Camera SD22404T-GN-W 4MP .

www.thingiverse.com

@CanCuba - Awesome find. Thank you for digging this up. Now I need a 3D printer!

 

[CanCuba]

@CanCuba - Awesome find. Thank you for digging this up. Now I need a 3D printer!

May be wise to double check the screw positions. I found the actual mount I was looking for but some may require modification depending on the cam.