Hey folks, having a bit of an issue with one of the 4 2132F-IS units I purchased.
3 of the 4 cameras worked fine with the mtd hack for my 7616NI-E4 NVR. The last one, when it's plugged into the POE port, the NVR does not see the Camera. If I connect my router to one of the POE ports and check using SADP, it also does not see that camera. However, if I use a separate 12V power supply and plug it to my router, it sees it fine. I tried restoring everything on that IP Camera and still has the same issue. Has anyone had this issue before?
They're all from China and came with the 5.2.8 CN firmware. The mtd trick worked for the first 3. The last one seems to be failing not because of the mtd trick (I restored the original mtd and still has the same issue)
Thanks!
3 of the 4 cameras worked fine with the mtd hack for my 7616NI-E4 NVR. The last one, when it's plugged into the POE port, the NVR does not see the Camera. If I connect my router to one of the POE ports and check using SADP, it also does not see that camera. However, if I use a separate 12V power supply and plug it to my router, it sees it fine. I tried restoring everything on that IP Camera and still has the same issue. Has anyone had this issue before?
They're all from China and came with the 5.2.8 CN firmware. The mtd trick worked for the first 3. The last one seems to be failing not because of the mtd trick (I restored the original mtd and still has the same issue)
Thanks!