180 IP Cams with option of using each half of the view separately?

[Iceman24]

I am trying to find out if this is possible in case it was wonky to have a really wide view on 16:9 screens. I would still get the advantage of only needing 1 cam and 1 cable run, then just separate the views from each other, but I can't find anything that says any of these cams have that feature. Anyone know anything? Thanks.

 

[wittaj]

Nope not the way the 180 is designed.

You would have to go with a camera like this if you wanted to do that.

https://www.amazon.com/EmpireTech-Dual-Directional-No-Splicing-Multi-Sensor-IPC-HDBW5441F-AS-E2/dp/B09H2ZRYX8/ref=sr_1_14?dib=eyJ2IjoiMSJ9.rlLr7XzvNpoPEyRi8GJwdEkm1d6uytP4MA-izHrbvKgCq4qG6O3LnQI-c-UbILWnUitDdQCizzw9E4IhC0h8kEQpr5zKXQymrtjTXt0BvxO1G8kl64QgO29V20Y3fj2DT07bkJeatiC2bmEwwie5uiUze-A027O--XB3FK6_bVlim7Uf3K1oI-3-PIpK60s9eN4RvQ1Z9aiQgqqvzC9lzE032OFEDn8Lp6poszNj4Lo.BZFgJObQq5AFgUCrefhifvpQqAEa0xWbg-uwTtELB18&dib_tag=se&m=A329YQ83EBQGJF&qid=1711150769&s=merchant-items&sr=1-14

 

[Iceman24]

Got it. Thanks.

 

[Mark_M]

If you have a Dahua 180 FOV camera, this API command may be able to switch it to two channels.
You're better off buying a camera like liked to already (then you can rotate/roll each camera).