Search results

I’m using the Guarding Vision app.

Using the GV app, apparently there is no such notification. Oh well, thank you anyway.

Has anyone ran into an issue where doorbell pushes do not record video because of the microSD being full? Isn’t there a setting to overwrite files? I thought I saw this option previously but I cannot locate it now so every few weeks I have to pull the card and format it.

I purchased the NVR from Andy and it has the most recent fw, he said that it’s a known bug with no fix as of yet.

Six, including the doorbell.

Apparently this issue is a known bug on these Hikvision NVR’s. Guess I’ll have to live with it for now, or just rely on the microSD card in the db for backups.

Hi all, I’m trying to chase down issue preventing me from viewing event playback on my Nelly’s flavor db. I have the db set to record to my NVR (NVR7608-8P-4K2) as well as a microSD card. Whenever I try and view playback on GV or Hik-Connect apps I see the above error, and when I try to view...

While I’m not sure anyone else ITT uses Camect I’d like to point out a very useful tip. I’ve been chasing issues for a couple months where my db kept dropping connection. I tried everything but could not figure out what was causing it. Well it turns out there is a setting in Camect for...

Did some experimenting to see if I could fix the issue. Completely powered down both NVR & Camect, then rebooted db and tested playback through GuardingVision and Hik-Connect apps, both still give error.

I’m using Camect in addition to NVR so I’m going to do some testing this week to see if this is what is causing my issue. I’ve been running this setup for several months and this issue only started happening recently.

I wonder what it is that causes this issue.

For those of you using the GuardingVision or Hik-Connect app, have you ever run into an issue where you cannot play video notifications from bell presses? I have rebooted my NVR as someone elsewhere on forum notes but it did not solve the issue. The db has micro sd card but I have the feed...

Thanks, I’ll take a look.

Nope. Strong signal every time. I rejoin network and all is good for a few weeks.

Nelly’s db cam and it’s gone flashing blue again, happened 3x now. The only way I’ve been able to fix it is to reset and setup new. Should I be concerned and or start looking for a replacement?

I found resolution for first the issue, factory reset the problem camera and now sub-stream is available.

For my exterior cameras I use GuardingVision or Hik-Connect and I am running into an odd issue that is kicking my butt. When I set view to 9 cameras one camera displays “Failed to play video,” however if I choose 1 or 4 view this issue isn’t present. Also, if I expand the problem cam when I’m 9...

Well Amazon was supposed to deliver new microSD cards today but apparently there was an issue so delivery is now next week. On a side note, I was reviewing night footage and there seems to be a lot less stuttering. I’m going to do some testing today and tonight.

Awesome this version brought functionality back. Thank you!

I am waiting on new microSD cards to come in. After trying only this camera and not seeing any improvement I messed with FPS lowering it down in steps, went down to 15 and it really didn’t make any discernible difference.

Did not make a single but of difference.

Camect is connected to Managed switch, the cameras do not physically connect to it per say, they pick up the feeds through ONVIF/WebRTC. Both switches are gigabit.

Windows Mac

Actually the entire CCD tree is not present for me.

Do any of you with Nelly’s flavor db have WDR settings available? I’m not seeing it and I know that I had it previously in Batch Tool.

Technically my topology is: I’m actually running the two IP cameras at 3072x1728 which is about 11MP in total for Camect + the 2MP for db cam = 13MP from the 24MP Camect can handle (without paid upgrade). Since I am seeing this issue in live camera view from browser (as well as recordings)...

Currently I have 3 cameras, 2 8MP cams & a 2MP doorbell camera. There is no way that I know of to adjust encoding on Camect but the camera is set to 1/120. What type of bottleneck could potentially be the issue? I have plenty of bandwidth and the distance from camera to switch isn’t terrible...

Yes this happens when viewing camera via browser and Hik-connect/GuardingVision app. With regard to your second question, the cameras are wired to PoE switch that is connected to my Eero router and Camect picks up the feed over the network via ONVIF.

The issue happens when viewing live and on recordings. I’m using a Camect for storage and AI/intrusion detection, all native camera AI turned off. Cameras are all hard wired using PoE. Settings: Exposure: 1/120 Gain: 100 WDR: Auto Wide Dynamic Level: 30 HLC: Off White Balance: AWB1...