Search results

OK, thanks guys, I will leave it alone. BTW, I have one of those dongle things to, and it helps with the resolution when you remote in.

I have a BI setup at my parents place running on a HP Elitedesk 800 G4, i5-8500, 16GB RAM, and a couple of NVME SSD's. There are 6 cameras connected; 5 Dahua and 1 Reolink, and the CPU utilisation is fine, typically ranging 12-16%. I have a GPU lying around and was wondering if there was any...

Thanks for your reply Mike. I think I know how to setup IVS in the camera, but how do I get that to come up as an alert in BI?

I have just set up BI at my parents house, and have a question about motion detection/alerts for one particular camera. The camera is a HDW2531 and the scene is as shown in the photo below: I have already used the zone map feature in BI to block out movement on the road (and have a clone...

Same with my system too.

I've also tried running it with custom models unticked: And I end up getting the error below....

Yes, it looks like it is doing something, and its also chewing through the cpu utilisation.

I did this, however it hasn't made a difference either. I've tried stopping and starting code project from the button in the page, and also rebooted the pc again afterwards and still no change?

Turned off face detection - thanks. However no change in the text field.

I've just started to try using codeproject for ALPR and I cant figure out how to get the field next to "Use custom models" to display anything. Even when I click on the 3 dots to the right of the field it comes up with the following message: And when I stop and restart codeproject, it is still...

My apologies, I accidently wrote 25% instead of 5%. I've now corrected the sentence.

My BI pc is an elitedesk i5-9500T, so reasonably similar to yours. I installed Windows, Bueiris, the database and new clips less than 7 days old on the C-drive and in my case I have used an NVME SSD (Your pc will support these too). If you think the speed increase/responsiveness of a pc is...

Hi, I was looking at buying a new camera that is able to door LPR on board rather than relying on software. I was thinking of buying the HFW7442H-Z4-S2 because I presume it is an LPR upgrade of the popular varifocal B5442 camera, however I can't find it available anywhere, other than at a few...

Unfortunately probably not suitable. I'm interested in the onboards LPR/ANPR features in a camera that is similar to the crowd favourite B5442H. If anyone has any other ideas, please let me know?

Does anyone know if this camera model is still available, or is it superseded by something else?

Thanks for that. However, is there a way to just block out the detection from the area that I don't want to detect in? Also, in terms of IVS, what would be better for this application? Tripwire or intrusion?

Hi, I just recently purchased one of these and I have a question about configuring the SMD4 to detect a human at the front door: https://www.dahuasecurity.com/au/products/All-Products/Network-Cameras/WizSense-Series/3-Series/4MP/DH-IPC-HDW3466EMP-S-AUS The photo below shows where the cam is...

Is there any safety considerations in running 2 lots of poe over one ethernet cable? ie you would be running power over 4 instead of 2 cables, each pair is its own circuit with a certain amount of watts consumed by each camera. Is there the potential for the cable to heat up excessively/cause fire?

You should look at optimising some of the BI settings as my i5-9500t hovers around 8% cpu utilisation with 4 cameras

Firstly, I'm curious to know which is the latest software? I also presume their are others that are using a later version of the firmware than me, so I would assume it can't be a bad thing. provided the firmware is stable with no bugs. Perhaps additional feature may be present in newer firmware...

Hi guys, I've looked around and am confused as to whats the latest firmware for my IPC-HFW5241E-Z12E . Its from EmpireCandy has the following firmware in it: Thanks for your help!

27 metres / 90Ft

I use one of these with 6 cameras and no issues whatsoever. I have 16gb ram. OS and initial recordings on a 512GB NVME SSD, and after a week recording are moved to a 500GB 2.5" SSD. https://www.australiancomputertraders.com.au/hp-elitedesk-800-g5-dm-micro-i5-9500t-2.10ghz-16gb

Ok, So I've changed the settings to CBR and H264. I see how it goes tonight woth those settings, and compare the images from previous nights with the same cars/number plates. I'll then look at adjusting the IR to 100 - I've checked and its currently set at 50 for near and far. When I adjust it...

I have a IPC-HFW5241E-Z12E cam setup and zoomed in specifically to capture the licence plate on cars going past in our street in both directions. The camera is mounted about 6 metres (20ft) above street level, and is angled from the left side front of the house, pointing approximately 45-50...

Hello All, I think I have exactly the same problem, and I am using the same camera - IPC-HFW5241E-Z12E I wasn't able to get a short video, but I have 2 snapshots that I think will explain the stuttering problem. This pic shows the car moving straight after the camera is triggered: A few...

Thanks, worked a treat!

Thanks, I'll try that version when I get home tonight.