Search results

Yea the other issue from my July 2019 build which is what I had before updating, all the other FW's that I tried to go that were newer than July 2019 something happened with the HDMI output. I no longer get a video on my monitor that uses an HDMI to DVI adapter. But works on monitors that...

OMG! It's 100% NVR firmware related! FW: DH_NVR5XXX-4KS2_MultiLang_V4.001.0000006.0.R.210208.bin No good. I even updated the problem camera to General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203.bin, and that did not fix the disconnecting every 3-5min. I decided to go back to...

Ok, I'm going to let it sit for an hour. On the NVR itself I do not see a refresh, only on the web interface. So maybe I will get lucky and they will get moved to the bottom. If not something for sure is wrong with this current FW release.

I have deleted them all from the bottom list. Now they all just show up on the top section. They do not automatically move below. Also the one that I did the factory reset isn't even showing up anymore. I'm almost thinking it might be time to go back to an older firmware, to see if the...

After I upgraded my NVR firmware and finding the disconnecting issue with Cam1, I did a factory reset on the NVR to see if that issue with CAMERA 1 would go away. When I did that my only option was to add all the cameras manually as they were not adding automatically. So that is why I figured...

On my first attached image you will see 3 & 5 RED, as I swapped the ports. I waited and nothing changes. Its like each port is looking for the camera with the IP that you see listed on each port. Port 1 original was 10.1.1.65. I did finally get it to find the camera, I forgot my IP on my NVR...

Right for some reason it's not doing this. After factory reset of the camera I plugged into Port 1, left it there for 5-10 min. Nothing happens. Never discovers any new devices. I've refreshed many times, and it never shows that it found the camera.

My NVR Model: NVR5208-8P-4KS2E FW: DH_NVR5XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813 IPC-HFW5442E-ZE FW: V2.800.0000000.17.R Build Date: 2020-06-20 IPC-HFW5442E-ZE FW: V2.800.0000000.0.R Build Date: 2019-05-21 So I wanted to do a factory rest on my camera with the build 2020-06-20...

I have the following cameras: (2) IPC-HFW5442E-ZE IPC-HDW2431TM-AS-S2 IPC-T2431TM-AS-S2 IPC-HFW2231T-ZS Yes I have hit the refresh many times. I waited for an hour. When at the top section before adding, they are also at the port 37777. I think when you first get the cameras they are I...

I'm having the same issue. I did a factory reset seeing if it was resolve a couple bugs I have been having since FW build July 2019, on my NVR I re-configured everything, but the cameras do not move to the bottom by their selves. When I move them down manually they are all at port 37777 vs...

NVR5208-8P-4KS2E I upgraded the firmware on my NVR, previous was a 2019 build. I should have wrote down the exact date! I upgraded to the following: v4-001-0000006-0-r-210208.55064 (V4.001.0000006.0, Build Date: 02-08-2021) After the upgrade, I lost my HDMI output. Now only VGA output works...

Yes works perfect!

I was looking all over. I just didn't dig deep enough into the configs. Thanks for your help! Thanks!

NVR Model: NVR5208-8P-4KS2E I search around but can't find anything on this subject. My old NVR from LaView had an option for a Beep sound on the NVR when it detected motion. Does anyone know if there is a place to configure the Dahua NVR to make a beep sound when an IVS tripwire is...

I agree! I do hope they can fix their firmware so it can work with modern browsers. IE is slowly dying out.

It's on the second page of the main menu. Click the right circle (middle bottom) to get to the 2nd page. Then you can download the videos to your local HDD.

I contacted Andy from Empire Tech about the issue here. Turns out there are still some bugs with using IE and obviously other browsers. The good thing is I found out you can d/l the videos by going to the Backup Options page. It's just you have to remember what you need to download, as...

I have finally upgraded my NVR to a Dahua NVR5208-8P-4KS2E. Current firmware v4.000.0000001.5,Build Date:2019-12-18. I’m upgrading from an LaView NVR which appears to be a rebranded Hikvision, and they don’t seem to fix any of the bugs I have found, there hasn’t been a firmware update in over...

I do have a wireless router, that does have Static Routing. Could I just connect my NVR to my wireless router and configure the static route? So would gateway be the NVR IP? 192.168.254.1 Destination IP would that be the IP that I assigned to the IP Camera? 192.168.254.5 Then 255.255.255.0...

I just tried what you said, unfortunately I'm still getting an error. :( Error says: Cascaded router network address must be a WAN-Side subnet. I'm starting to think that this router cannot do what we want. I'm wondering if things would work if I just change the subnet mask on all the...

Ok, I have Motorola NVG589 router. I could not find Static Route. So I searched My model, and found that this Cascaded Router is what I need to change. But I tried several combinations of IP's in the fields, but I would always get some error about an IP in the Network address field. :(. See...

Excellent! I will try this tonight. I'm sure this will solve the problem. it's all making sense now. I'm sure this is the problem for many people who want their cameras to do some notifications vs the NVR.

The camera is connected to the POE port on the NVR. Now you have me thinking, as on my local network, I cannot connect directly to the camera unless I connect to one of the Ethernet ports on the NVR, or by connecting to the camera via the NVR IP, and a port number such as 65004. Is there any...

I'm also having the same problem! IPC-B5442E-ZE 2.800.0000000.0.R 2019-05-21 Gmail notifications work on my NVR which is a LAView (Re-branded Hikvision). But on my camera it just FAILS. I have it setup with the same settings as my NVR. :( I hope this can get fixed.