Search results

The problem seems to be that the IPC SW is requiring adobe flash OR the own specific add-on. Both is not more able with the new Chrome or FireFox. Hence it seems to be able only with the old internet explorer or via Smart PSS. Both is BAD!

Strange: on this computer I tried months ago and also today to install Internet Explorer 11 - without success. There the exe-file is NOT there. When I look into the directory of my other computer: it is there and it is working !! When I try to copy the files from the proper working internet...

F... ! Do you know whether Opera or any other SW is still covering the flash gap? BTW: you can use a not-updated Win system only, if it is really stand-alone. When you have any contact to the outer world, you have very fast problems ...

You might be right. I see only the savety issue, so that updates are highly recommended. How to proceed with the missing video for the IPC? Flash seems not to work at any Firefox,.... any more. I need to have a solution - SmartPSS is not really usable. I would prefer more the direct setup via...

I am using Win 10 Pro with the latest update 21H1.

When I am clicking on "Explorer" I am startin the file explorer only and NOT the internet explorer. Hmmmmm....

Not really: Maybe the problem is, that my system is already upgraded to Edge? Do I have to downgrade it?

I tried Ruffle as a replacement for Adobe flash. Result: Ruffle stated "Something went wrong :(", "Ruffle failed to lead the SWF file, The most likely rason is that the file no longer exists, so there is nothing for Ruffle to lead. Try contacting the website admininstrator for help." Hmmmmm...

The core problem seems, that the FW of the IPC needs Adobe flash. But this is not more available at all. Any Idea? Further I am not successful to install internet explorer 11: I download the file from microsoft and followed the installation. Reboot is necessary. But the explorer is not available...

I just tried whether my Surveillance Station (synology) is occupying the camera. Hence to deactivited the Surveillance Station. No change.

I just tried whether my Surveillance Station (synology) is occupying the camera. Hence to deactivited the Surveillance Station. No change.

@sebastiantombs: no real solution found. But I leaft there also the question whether anybody have an idea. @garycrist: I have two computers. The explorer is on this one, where I don't have admin rights. Is it still possible to download the explorer and to install it to a standard win10 computer?

Hi, I have problems with my IPC-HFW81230E-Z: with no explorer (FireFox, Edge, ....) I have the live stream, nor the recordings nor the video for set up parameters. With other Dahua cameras it is working fine. I am using System-Version 2.640.0000008.0.R, Build Date: 2021-09-09...

Sorry, the massage: "Adobe flash player is not more supported" is shown.

Hi, I just tried this. Result: plug in is missing. Where can I download the right version for this - there are different version available!

Hi, did you ever tried the latest version from Dahua: Dahua Technology - Leading Video Surveillance Solution Provider with CCTV Products, IP Camera, PTZ, HDCVI products, NVR, Intelligent Building, Intelligent Transportation and Software - Dahua Technology The latest version is...

Hi, I am using different IPCs from Dahua. When I log into the Web surface to change setting, I everytime see the live-video, the recordings and the video for set up camera parameters. At every camera? No. The HFW81230E-Z makes problems - everything is possible, but NO video is shown. Not the...

Hi, a while ago I started to use my VTH1660CH / VTO2000A as a alarm system. For this I need to provide the available sensor data of my KNX system to the VTH1660CH and/or VTO2000A. Because - both system shall be galvanic separated (failure in one system shall not damage the other, grounding not...

Other question: I have additionally a VTO2000A-B (3 push button module). One button is necessary for a 2nd flat. If I want to use a button to call a cellphone (iDMSS+) only, with SW 3.2 I also need a VTH - even when it is installed somewhere in the basement. Is it now possbile to forward this...

So, after a long trial with a lots of try-and-error, I found the issue: Before the update the VTO from SW 3.2 to SW 4.3, the loud speaker level was near the maximum value - why so ever it was necessary to have a loud message out of the loud speaker. With the update to SW 4.3 it was still on...

Any ideas of the source of the problem? Any ideas, what I should do to find the problem?

Hi, I have bricked my VTO2000A with SW 3.2. After all the support, which I got, I was able to unbrick it. Many thanks particularly to riogrande75 :) :cool: Now I loaded: - MCU (customer version only, not factory - should I load the factory version??) - Software 4.300.0000001.0 R (main SW and...

Hi, short status update: I am using pc2pc LAN cable. I update the commands.txt as follows: run dr run dk run du run dw tftp 0x82000000 pd-x.cramfs.img; flwrite tftp 0x82000000 data-x.cramfs.img; flwrite run dc tftp 0x82000000 .FLASHING_DONE_STOP_TFTP_NOW The result was: c:\tmp>TFTPServer.bat...

It had the (nearly) first one with signature from Duhau: V3.120.102600.0.R.20180620 It was working fine, but only in English language - not very helpfull in German country side. Hence I want to upgrade to the later multi lanuage version: V3.120.0000.0.R.20190222 During this upgrade, it bricked...

Hi, because I was not able to fix the problem with the router / switch, I organised last night a pc2pc LAN cable (same as normal LAN cable, but with twisted Tx and Rx). Then I changed the IP address of my PC as stated on 1st page. Then I changed the commands.txt to: run dr run dk run du run...

Hmmmm, I read the intructions again and again. Nothing forgotten - I hope. But I fear, that my FritzBox can Route only from the Internet to the local net. Therefore I re-try it with my TP-Link router: But nothing changes.... To ensure, that I have all necessary file, here the complete...

Hi, I have bricked my VTO2000. Therefore I want to load with TFTP new FW. In this process I have two problems: 1: Routing with my FritzBox 7490. Question is this correct (192.168.0.62 is my PC) ?? 2: TFTP update process: I downloaded the necessary files. To load the "pd-x..." I update the...

Hi, is there any better way to unbrick the VTO via RS422 or the micro SD slot in the unit (I think I saw there one) ??

Hi, during trying to load a new FW (from V3.120.102600.0.R.20180620 to "V3.120.0000.0.R.20190222") I bricked by VTO2000A-C: it is booting, but the LED of the nameplates keep on. Status of the VTO: it provides answers to PING (192.168.0.107) PuTTY is not able to connect via Telnet (neither port...

@weigle2 and nymphaeles: GREAT! Now it is working. :goodpost: Just disable the moving detection and enable the IVS. This night I will check it. I hope my problem is solved now :)