Search results

Odd request here. Someone from this thread really helped me out last year. We discussed my whole setup over the phone. Now I just can not find his contact information anywhere. If he stumbles onto this, could you shot me a PM when you get a chance. It would be really appreciated.

Yeah, that is where I am looking. Maybe the user left here or something. How do you view just your sent PM?

He gave me his phone number, and I was going back through here looking for it and I can not seem to find it. I just felt like there was some type of instant messenger almost.

There was a guy on here that helped me out back in August of last year. He was super helpful, and I had a few more questions for the guy. Now I can not find his contact information :(

It has been a little while, since I have been on here. I was speaking to another member on a cam setup, and I want to say I was speaking to him via a instant messenger through this site. However, I can not find the old logs. Am I just making this up or is there a messenger that is on this...

I am very much a noob. I just downloaded gDMSS and was reading an article on how to setup the app. This is the one I am referring to: https://www.smartcamera.services/cctv-system-user-guides/how-to-set-up-the-dahua-app-dmss-on-a-smartphone However, when I read your post it sounds like I...

There a a few dmss apps. Is this the one I want?

So when you are away you can not use dmss to view your cameras?

I am sure this has been discussed, but I tried searching and could not find anything specific. I have an all Dahua home setup with 4 Cameras on POE Switch that is connected to my Dahua NVR. I love the quality of the picture day and night. I selected these cameras over others from the input...

I have been working on my physical configuration of my network to get ready to apply the config file to my edge router. I think I am pretty close, fingers crossed. The one question that I have is on my NVR. My Switch1 is physically located in the garage. Everything else is in my living room...

I went ahead and re-worked the physical connections for this setup on the Edge Router. Now on ETH3 port of the Edge Router I have a POE switch that is then connected to my 4 cameras. So now I have the following physical connections on the Edge Router. ETH0 - Nothing ETH1 - Input from the...

Well here is my rough rough draft of my home network. From reading the initial posts by @guykuo it looks like I need to add another physical switch to isolate the camera network completely. I think I have an unused non POE switch that I could implement. If I have a non POE switch, that is...

What program did you use to do this network diagram. I am trying to implement this tutorial but would like to share my network diagram before I get started. I know this will be a challenge for me but I am willing to try and take the time to get it down.

10/4, it is going to take a fee days to get everything in. The switch was not in stock so it might be a bit on it.

Due to my feeble mind I am trying to copy @guykuo setup on the Edge Router X. I do not mind purchasing another POE switch to to mimic the setup. I think the dog at the last 12V power supply so right now I am using the POE passthrough. So I just ordered a new replacement 12V power supply and...

I could not find my 12V power supply for my EdgeRouter X, so I just ordered another on of those. Then I checked the model number of my AP it is indeed the UAP-AC-LR so it looks like from the specs you sent over it does support POE 802.3 af. So I went ahead and ordered the Ubiquiti US-8-US...

Thank you all for the responses. I think I most certainly need to power my Edge Router with conventional 12V plug. The reason I had it setup like this in the first place is I thought you could only use the POE out on this router if you used the POE in piece. I have an AP in the ceiling that...

My gosh thank you so much for taking the time and effort to put all of this together. I want to get started on this right now! I have my system already installed and I have it wired in physically, but want to isolate each LAN like you have them isolated. However, one of my questions is I have...

Hello guys I have had my 4 dahua POE camera setup with NVR for quite sometime. I really like the setup, but I know the network configuration piece is not what would be recommended. I am looking for guidance of how I should set this up correctly. I have read I need to put the cameras and NVR...

I am bowing down and looking for some help from more experienced people than myself. I had a vehicle stolen a while back, and at that time I bought into 4 dahua security cameras with one NVR 5216-4kS2 This is how I currently have the network setup. I am under no illusion that this is optimal...

Thanks @catcamstar for the quick response. Today first things first I would like to get my network up to snuff. I ordered and installed all this equipment after my truck was stolen. Nothing like a little post mortem security. I got everything up and running, but I am not under any illusions...

I have an NVR 5216-4ks2. That would mean that the software that is running on this device is indeed the DSS Express software? The reason I ask is b/c on my laptop that I use to access the system from time to time that I use is Smart PSS. It looks like from what I have read I need to maybe...

I have 4 Dahua cameras with the NVR. I have the system setup wired and recording. I am looking for some professional help to pay them to remote in and help me setup tripwires and then setup an app on my phone to view my cameras when I am off my LAN. I just need some professional help and I am...

I also see the 3G piece. However, who is it coming from, and how would you set it up?

I am working on my IVS Tripwires. I am trying to get them to fire off an email or better yet an SMS message. I see the option to select email, but I do not know where to input the email address or the sms number for texting.

That is interesting. I graduated with a CS degree back in the day, and hiding common ports was what was always preached. I had no clue that now it does not matter all that much b/c they scan so fast, but it makes complete sense. Now I am trying to setup IVS on a couple of my cameras. I should...

Yes sir you are the man. That was it. I bet when I was setting this up or something a while back, I fat fingered the thing and put it on port 8000.

I am completely baffled at this too. When I login to Smart PSS I only have my NVR setup as a device. Then all my cameras that are connected to it show up as I drop down the menu for the NVR. When I just try to put in the ip address as @catcamstar wanted into the browser 192.168.2.45 I get the...

One thing that I worked on last night was updating the firmware packages on all four cameras. I found them all on Andy's page, and that really seemed to help. Before it would not let me draw any lines in the IVS setting no matter how I tried. After I get done with some work today I am going...

Morning @catcamstar I have a POE switch which all 4 of my cameras are connected to and one NVR. I only have the NVR listed in Smart PSS, but I can not login to it by just putting the ip for some reason. I have to login to smart pss and then click the link to web button. That is not a big deal...