Search results

update - PTZ Idle motion still only works when you manually move the ptz away from a preset. I've re-enabled Time event to bring it back to a desired preset.

did the same with 7 of mine also, no reset/nothing, just upgrade. A Note though - As I upgrade through the NVR's web browser, opening the camera tab from within the NVR, I sometimes had to close, and reopen the web browser, as it appeared the camera wouldnt go into update mode. it would just...

This is the exact issue i had upon purchase of this camera. I went with a "DaHua Hi-PoE Midspan - PFT1200" dedicated HI-POE injector. I still get the occasional reboot, but frequency is more like once a month. I did try a number of firmware versions before i got the POE injector, and the...

yep. I installed it 2 days ago. It solved all the issues I’ve previously reported in this thread. No random reboots. idle ptz works now. ptz object tracking locks on better. Did I mention no random reboots!!!

Interesting.. Just as i was reviewing my PTZ firmware version, I've noted that the V2.812 update DID NOT TAKE??!? Device Type SD5A425XA-HNR System Version V2.810.10O8000.0.R.P9.2519.UN.NR, Build Date: 2021-09-24 WEB Version V3.2.1.1082385 ONVIF Version 20.06(V2.9.0.979397) PTZ Version...

Oh, immediately this solved the issue I have. irrelevant of what moved the PTZ. Question is though, being a Time Task, does it count to X seconds, then repeat continually? or does the counter reset and begin after a motion/ivs/tracking event. Ie, what happens if it is in the middle of tracking...

Ahh ok, interesting.. What sort of problems have you experienced? I've used it successfully on my 5442's for quite some time without noticing anything. For the most part, the PTZ sits at 3xxx kbps until vehicles drive past.. Originally i had VBR set to 16xxx, but was still experiencing some...

Hi looney.. I learnt early not to make changes with NVR web interface and Smartpss, but rather from the camera's web interface directly. Even spun up a windows 7 / ie11 virtual machine to i could experience the webplugin in full force :) As a small update to my previous post, I've reloaded the...

Hi All. I'm Extremely frustrated with my SD5A425XA-HNR currently.. Purchased from Andy late last year, but only just got it installed approx. a week ago now. Initial problems was that the unit would hang/freeze, and would require me to unplug, and plug it back into the NVR. After much back and...

In IE Mode, it shows please install plug in, so I install webplugin.exe, and reload IE mode again, says i need to install plug in. Endless loop. Got sick of trying to troubleshoot it. In CHrome / Edge, it works without plugin, but I wanted the ability to full screen the video to do IVS...

Having acquired a PTZ camera, and running windows 11. I wanted the ability to be able to full screen the camera feed in order to setup my IVS rules. This was only possible in IE with the plug in to my knowledge. I couldn't do this in chrome, firefox or pale moon, or whatever. (If you have a...

Hey @EMPIRETECANDY Andy, Has there been any feedback from Dahua in regards to this bug? Thanks :D

@Griswalduk, I've made Andy aware of this issue, which he has reported to Dahua. I thought it was worth creating a post as well to create further understanding to see who else is experiencing it, and possibly help understand the triggers to fix this bug. In terms of your comment only happens...

@EMPIRETECANDY, looks like same nvr and camera combination too. I wonder if it’s the camera fw.

So it looks like it sometimes happens after my weekly auto reboot of the NVR.

So you're noticing it also with the same NVR5xxx? What camera's do you have of interest?

Hi, Randomly I notice that the camera names I've configured have reverted to "Channel1" (or channel2 / 3 / 4) randomly. However, They don't all change. It is random. Reviewing recorded history, The only trigger i've noticed is we had a power outage 1 day ago, and when the whole system came...

I third the motion.. Just got my latest delivery today!