Search results

Hello why dont you look at C3-100,200,400 series access Control PCBs. I Think they offer same functionality as InBio series but cheaper. I am also curious how these can integrate with Hikvision and Dahua systems. --> zkteco.com

Always ask for a photo of the label on the camera - Always!

Hello having a DS-2CD2032F 5.2.0 English now after whoslooking video turorial and an DS-2CD2432-IWS cube camera now 5.2.5 after CBX upgrade. How can I edit and change the CH to WR that displays in SADP and webinterface but also the serialnumber and MAC address? Thanks Peter

Ok so iVMS-4520 and hik connect is the same thing didnt realize Aha I thought they used 12V as their cameras do. I too found some various passive poe extractors like one with 2 rj45 connectors and a Little built-in step-down converter module to 12V and 5V output - perfect to fit in a little...

If Hikvision has done it right you could probably connect a smoke alarm to alarm inputs to cameras and label them and setting their conditions/linkage in the camera, nvr etc.. There are access panels and security panels that I have seen having wired/wireless zones - surely these must seamlessly...

A sidenote, what would be the purpose of the indoorstation? - I can not bring it with me when doing daily tasks if someone chimes the bell but the phone is always in the pocket.

Hello, have you tried iVMS-4520 or Hik-Connect which are similar softwares as iVMS-4500 but has some kind of intercom interface. I think cameras can be added to iVMS-4520 also. I am also about to buy this DS-KV8102-IP/VP intercom outdoor unit. According to Tech support EU VP-version does not...

Ok nice but where in MTD5 and MTD6 do I change MAC, serial and CH to WR? Thanks

I was thinking its good to change CH to WR so it shows up properly in SADPtool and in webinterface. if on 5.2.0 5.2.3 5.2.5 can I change MAC adress and serialnumber if I change checksum also? So I would like to change these things to scrable it around a Little. Problem is I dont have original...

Yes it should be possible, I used Whoslooking's video on how to do it - https://www.ipcamtalk.com/showthread.php/5988-MTD-HACK-made-easy-on-Video?highlight=mtd+hack+video It is said to be a permanent fix to english/international version however it still reads as CCCH as opposed to CCWR...

Thank you so much Whoslooking for this fine video explaining how to use hexeditor and putty also. After the editing, programming and restoring to factory defaults, it still reads CCCH instead of CCWR. Can I safely upgrade from 5.2.0 to for example 5.4.0 if I want to and it is still...

These cameras look interesting with some smart features and ptz etc.. Reasonable price also given ptz and all jazz included. Downside is that the doomed version does not have ir but instead has a more protected doome. Doom version looks like an outdoor version but not sure. Maybe someone has...

I am not familiar with these cameras but I have heard there is a rubber/foam ring around the lens preventing ir reflection back into the lens - check it! If there is too much ir light cast in the middle then maybe one can carefully bend the 5mm leds in the inner ring a little bit outward to...

Yea I have seen here only good reputation about Julia but never bought from her. I am also going to mount it up above the door in the ceiling so to speak so it looks down at the guest. I dont know if the smart ir function really works on these cameras and if it doesnt then maybe the 2532 with...

This image is only 47kB so cannot really see any detail - maybe post original images!

Thanks man - Ok so the 2132f-is with firmware 5.2.3 or lower is the way to go ~80isch bucks on ali :) I totally missed this 2 and 3-axis thing and mic I thought was in-built in both cameras - so much for browsing ali. Maybe its good that you can connect own MIC so we can direct it properly and...

Re: DS-2CD2132-IS vs DS-2CD2432-IS Sorry my heading is wrong it should be 2532 of course - but I cant change it now darn :) Can it be changed somehow by someone with more admin juice?

Can somebody please tell me what the important difference between these cams are because the physical appearance is about the only difference I can see. It looks as if I can freely set the lens in any direction within the transparent plastic dome on both cameras. Both have alarm and audio. Do...

Hello when looking at the DS-2CD2232-I5 product description it says "low illumination" but on the DS-2CD2032-I it is not mentioned however looking in the spec sheets on both says they have the same light sensitivity indicating the same sensor is used in both cameras. The only difference I can...

I think there is some kind of bell-icon among the small icons that you see in the lower portion of the display when in live viewing. Just press it and it appears some switch to toggle on/off.

Hello Sakuji, I was referring to the camera you have DS-2CD2432F-IW since you wrote 2432. They have no built-in relay but instead a small signal active low output. With the example relay module in the above link you connect supply to DC+ and DC- on the module. Lets say you have the 12V relay...

This is an excellent effort :) Connector looks like a 1.25mm molex picoblade found on ebay. Now people can experiment more which is nice. Ok so as long the bootloader is intact, we can always recover-boot like this?.

Hello Sakuji, you can look here how I/O works on the 2432 cube http://www.ipcamtalk.com/showthread.php?1880-DS-2CD2432F-IW-I-O-terminal I used a little relay module something like this from ali or ebay for simplicity...

Thanks klasipca and aster1x I found it! So if I have understood it correctly - All firmwares are multilanguage and depending on the values in certain registers in the camera, it will start up as a chinese or an international camera, and that these memory locations does not get written during a...

Congratulations to the permanent fix klasipca :) however where did you find the 5.2.5 firmware? I have only found the 5.2.3 official firmware at the european portal and it's only english.

Hello I have an DS-2CD2432 and an DS-2CD2032 camera to play with and I have some problems with the IR functionality. It seems the smart IR light functionality does not work on any of my two cameras. As I understand it the IR LEDs illumination would be automatically adjusted to prevent to much...

Just wanted to clarify how the I/O terminal at the back of the camera works with a simple painting. I have been in contact with hikvision about how to connect things to the alarm I/O terminal a loooong time but not received any answer at all so I picked it apart which was simple. The output is...

Well I have a 24V din rail supply to use with the injector but you can use any adaptor as long as it supplies enough current for your cameras. If you only want a single ethernet connection to your camera supplying power, then it has to be 48V since the camera will not turn on on voltages lower...

UPDATE: So it seems the 2032 needs about 40V and couple more milliamps to start-up but drops out already at 32V!!! and the 2432 needs 38V to start-up and drops out at about 33V!!! Allthough the wiki standard defines 37-57V as operating range for 803.af devices I really thought the camera itself...

Probably, It would be interesting to know if someone has connected cameras the way I have using these simple injectors in this way and have it working.