Search results

Hi Cookie. I tried doing this but its not working. I also tried changing the "networkport mode: " to "wired" and it didn't work either. Is there any other way? Thanks!

Is there still no way to disable to WiFi in the latest firmware?

Re: Help me select hardware: dome cameras; POE switch; monitoring software; storage s Thanks. Funny that this guy claims this adapter works though. http://en.community.dell.com/support-forums/desktop/f/3514/t/19585150 https://www.amazon.com/dp/B00FWOR638/

Re: Help me select hardware: dome cameras; POE switch; monitoring software; storage s Hi there. May I know where you obtained the caddy for the "5.25" CD-RW drive to 2.5" SSD drive" adapter from and how much did it cost? Thanks!

I see. So is this logic correct? 10x zoom is like 12mm 3x zoom is like 2.8mm For the 10x zoom, what is the equivalent FOV when fully zoomed out?

Does this come with a 2.8mm lens? What is the FOV?

Hi Everyone, I have a Hikvision 3.2MP DS-2CD2432F-IW Cube IP camera and "rtsp over tcp" works fine using tinyCam Monitor Pro in the internal LAN. However, when outside using 3G/4G, I cannot get it to connect. It has an active entry in HiDDNS (i.e.as.hik-online.com/domain_name) at port...

It worked! I just "unscrewed" the post and voila! Thanks for the tip, fenderman and ajayson!

Hi, I have a DS-2CD2432F-IW which came with this mount. The mount indicated in the official Hikvision manual is different from this one, wherein it has a detachable plate (unlike mine). Can this type of mount be still mounted on a ceiling?

How about this Hikvision 1.0MP (720P) DS-2CD2410F-IW? http://www.ascentech.net/img/products/tbt5-ds-2cd2410f-iw.pdf It's a lower end version of the popular DS-2CD2432F-IW.

1. What is the fastest speed available? 2. Can the slider be dragged while the video plays back rapidly at the same time? This way, one can save a lot of time reviewing footage. For example, dragging the slider allows one to rapidly view a day's worth of motion triggered events in like a few...

Is the Seagate Surveillance HDD also a good alternative to WD purple?

https://m.youtube.com/watch?list=FLjLeh_ZyJ1aDPVEXMThxLXg&v=8rG0gDGFtrU

How is the fan connected to the PSU? Can it easily be replaced without splicing wires and such?

Yes, the resolution difference is negligible. However, the vertical field of view lost is quite substantial. Even if you pan down a bit on the 4MP to be in level with the "skyline" of the 3.2MP, you still lose a fair amount of vertical field of view. The drain will be visible but the lower...

Is there a fan on this model due to the built-in POE ports? If yes, please let us know how loud it is.

I noticed that the 4MP is 16:9 by default, hence, less vertical field of view (it doesn't show the drain on the middle-bottom part). Is there a way to enable a 4:3 resolution on it to get back more vertical real estate on the field of view? P.S. I also noticed that in the turrent version, the...

Noted on the links. Sorry, yes, the new 2MP/4MP "true WDR" Hiks should be better in low light. However, I was referring to the older Hik models like DS-2CD2412F-I (1.2 MP) and DS-2CD2432F-I (3.2MP). Like you said, in daylight, the 3.2MP would be noticeably clearer than the 1.2MP. However, in...

Thanks for answering my first question. What I meant was is there a perceptible difference in low light between the Hikvision 1.2MP, 2MP and 3.2MP IP cameras?

If the 3MP has poor low light quality, then what causes a lower megapixel cam to be better? In this logic, is the 1.2MP > 2.0MP > 3.2MP in low light? How much better is it in terms of human naked eye perception?

1. Both comes with a 2.8mm lens and are non-WiFi versions. 2. The 1.2MP is significantly cheaper than the 3.2MP from where I live. 3. I'm initially planning to get 3 to 4 of these IP cams. Then I'd expand to 2 more of the newly released 4MP outdoor IP cams (i.e. DS-2CD2342WD-I). Comparing...

No problem, man. Thanks for the help.

Can you take a picture of which parts you popped off?

1. I see. So from the router, you connect a fanless poe switch. From this fanless poe switch, you connect a fanless NVR and each IP camera? 2. Would using the Hikvision NVR's built-in POE consume more power than say, using a DC adapter for each IP camera?

1. In this setup, how will you power the IP cameras? 2. How loud is the noise from built-in POE ports or is this coming from the fan of the NVR?

Can you point me out on where to buy a Euro version of this camera? Thanks!