Search results

i am in contact with the blue iris support and they told me about the key frame rate interval problem, so that's the state of the problem. same configuration in both cameras, one is recording and the other not. i also try to set frame rate and the key frame interval to the same valor. nothing is...

i set in each profile the "stored folder" and then i restarted bi, nothing is change. i have 8 cam, 5 are recording without problem, 3 not. i have the exact same config in all the camere. I check the config both in bi and in the cam properties and they are exactly the same.

this is from the camera with the problem. i am recording in the stored folder. i am not using the "new" folder. Also direct to disk is enable

thanks

I have 8 ip cameras (all the same model). I am experimenting a strange behaviour, on some cameras when i try to open a clip it pop ups an "sorry, the file could not be found". i will attached the screen of my config. Version: Release 4.8.5.0 x64 Service: No OS: Windows 10 Pro CPU: Intel(R)...

there is a wiki or a thred for the web server option?

ok so there is not an "answer" for my problem, if i want an x number of remote question i will have a tot amount of cpu usage.... thanks

yes, with all the remote session close the cpu for bi is 22-23%

sorry for asking but what you mean by disable all of the remote session? the monitor with the ui2?

closed

bi is running as a service

ok so ui2 says 34% with all of the ip cams set to 15 fps

i ll try

teamviewr

remotely with ui2 web page. i use 3 remote monitor. 1 my pc, and 2 amazon fire tablet using the ui2 web page.

i set all the cameras to 5 fps and now the cpu (i conseider only bi) is at 18-20%.

i do a clean install and i read the wiki, for the direct to disk and hardware acceleration. i reboot and now with all 8 cameras at 15 fps the cpu is at 40 %. do i have to try the 5 fps option ?

i decrease the fps to all of 8 cameras to 15 fps but the cpu is not going down. sometimes it goes from 50 to 60 %.

hi to all. i am currently running bi with 8 2 mpx ip cam at 25 fps. i changed my cpu (an old amd 8350) with a i5 7600k and 8 gb of ddr4 2400 ram. i run bi as a service and the record is direct to disk. bi cpu cunsumption is about 50 % . is it possible to decrease this valor? I know that i can...

i change my build to an i5 7600k

And a Simple Android box with ip camera viewer installed?

i found a refurbished HP Compaq 6200 Pro with 4 gb ram (i want to upgrade to 8 gb) and a i5-2400. i actually run 8 ip cam 2 megapixel. Is this enought?

Interesting. But i know that integrated gpus use the system memory for their operation. So much higher frequency on memory system equals in highter performance of the integrated gpu.

Hi all! I am uograding my blueiris server. I choose an i5-7400 with a te 630 as integrated gpu. So the million dollar question: how much important is the frequency of the ram? Ddr4 at 2400 la a good choice or i need a much higher frequency? Like 2600 or up? Thanks

image preview is only for ios?

ok thanks

The level of light that activate the ir led.

hi all, is it possible to modify the ir sensitivity in blueiris? If not would be possibile in the future? Thanks

If Someone has the same problem, the fix is to update blueiris server to the latest release.

i have managed a lot of foscam ip camera and that is the first problem that i have. so no ideas? or could you suggest me another ip camera with a wide angle of view fully compatible with blueiris? thanks