Search results

Thanks, previous one went faulty as had some house work done and then receiver side got plaster in it, gave it a good clean but still would not work. Hopefully the cheap one will last a little while

Thanks Tony, yes CAT from TV to NVR, the extender you have recommended is way out of my budget, I have ordered a cheaper one hoping it will do the job for now

Hi All need some help with choosing the right hdmi transmitter/receiver, I have NVR in the loft with cat6 cable coming down to the living room, my previous hdmi sender/receiver went faulty so need to replace. The faulty one is 4k HD and I have seen 4k 60ghz, would this be ok to work on my tv...

ok I have manged to update to firmware V5.5.801 build 211105. Another question / issue....... this new camera I added I have set up to send me intrusion detection alert and line crossing alert, none of them work or I am not getting any alert notification to my hik connect app. My previous...

Thanks Alastair, it platform G3. I assume it already has the latest firmware installed my camera firmware version Hikvision portal

Hi All I just added another camera to my NVR, any ideas which platform this falls under for firmware update ? DS-2CD2347G2-LU Current firmware: V5.5.134 build 200430 My previous cameras are DS-2CD2347G1-LU and I know they fall under G1 platform but new camera is G2 and I don't see a G2...

I did not purchase the 2tb, someone gave me it for free, so rather not pay any money towards buying a 4tb

Thank you for the clarification. I will try in the next few days

Hi All I want upgrade my NVR hard drive from 1TB to 2TB, I have never done this before does any one have any pointers or experience on doing this. My NVR is POE and I have a total of 5 cameras. NVR model is DS-7608NI-K2 / 8P cameras are DS-2CD2347G1-LU

Hi All Not sure if this has been posted previously or if I am barking p the wrong tree, please do correct me or point me the right direction Can I access my Hikvison cctv from a browser from an external network. For example: system is at home and connected to my home wifi and I am my moms house...

ok so I re-installed the add in (local service components) and can now move/adjust the line, thanks for all the help :)

Its weird cause I used to have the same and could move this line, I thought updating the firmware might fix this but no its still the same. Rebooted NVR and each camera individually too, still no luck. I am at a loss with this one

Thanks, all cameras firmware now updated to latest firmware

Thanks John. Useful to know you can search function using serial number, question.....when searching via serial number only 9 characters are allowed, which 9 characters do I use from the screenshot attached ? I have tried the first 9 characters after the camera model name and the last 9...

sorry I mean which platform do they fall under ?

HI All After the latest firmware for Hikvision camera model DS-2CD2347G1-LU (I have 5 of them in total) I know the Hikvision portal and have downloaded firmware for my NVR but not sure which firmware I need for my cameras as there is so much on there and its really confusing. Any help or...

ok so after taking camera down and taking near nvr plugged in new cat 6 cable, boom its working. Next job to crimp exiting cable with new connectors on each end of cable. appreciate all the help Alastair it is greatly appreciated

I’m leaning towards the network lead connectors faulty, will remove camera and try and new network lead

how long would the camera take to reboot, I waited a while and refreshed SADP still no camera showing. its now back it the original POE port of the nvr, when I check the via the NVR web gui its showing as offline (detecting)

ok here is the latest. SADP did not pick up the camera whilst plugged into the first POE port on the NVR (original place it was in when system set up) I even did a factory reset on the camera and plugged it back into the same port on still nothing coming up on SADP. I then moved it into a free...

sorry I meant to say since you last posted comment "And this requires that SADP finds the camera - if it doesn't when on the NVR, can you power the camera when it's connected to the LAN so SADP can find it? " I have not been over to neighbours house and connected my laptop to NVR to see if...

Here is what I get when I change IP address from web gui, to 192.168.254.2 I haven't been able to get to my neighbours NVR to check if camera is being picked up in SADP, but will do soon. Any ideas what newtork abnormal is ?

Hi Alastiar - Modify the IP address assigned to NVR channel D1 to be 192.168.254.2, how do I change the IP address assigned to NVR channel D1 ?

Hi Alistair - I have tried manual camera setting and changing the password to the same as the NVR, changed ip address to 192.168.254.2 also tried .1 and .10. Still no good The cameras that are online do not match password of the NVR, so I tried changing the password for the camera which I am...

Thanks Alastair, once I get the last camera operational. shall I go ahead and update NVR firmware, its currently on V3.4.101 ?

sorry also to add I moved into another POE port in the NVR and still no good

Hi Alistair, update........4 out of the 5 are working after reset, the one camera I was messing about with and changed password before you suggested reset and I have reset this one too but it just sits and identifying, I have also rebooted the NVR and still no joy with this one camera, any ideas ?

Thanks, its gong to take while, will report back as soon as I can

I think best option for now would be to climb up and reset the cameras themselves, is it matter if just resetting and then plug and play or do I need to add them ?