Search results
-
T
HI-DDNS lost connection (device offline)
might the problem be the ipv6-changing behaviour of the speedport ? -
T
HI-DDNS lost connection (device offline)
I tried it with uPNP and manually by forwarding the 3 or 4 ports in the router. Both same problem -
T
HI-DDNS lost connection (device offline)
now I have found the nice solution with the iVMS4500 using HiDDNS. It works nice BUT the DDNS seem to loose connection because it very often shows "device is offline" even it isn't. I tried the forwarding of the 4 ports in the router, didn't help, tried to use uPNP, didn't help, tried different... -
T
EZVIZ does not allow my cam
might be the portforwarding in the speedport the problem? I am wondering about because ezviz P2p is enabled and shown online in the cam-menue and ezviz detects the cam in LAN ...the only thing the damned cloud device does now allow action.... -
T
EZVIZ does not allow my cam
I need access to the video and other persons have to look the video too.....what would you suggest, using another cloud-system? Actually there are no cost free dyndns-offers for my router available.....otherwise I would try to get it by dynamic DnS -
T
EZVIZ does not allow my cam
thanks god my DS-2CD2032F-I can work again after downgrade to 5.2.5....BUT: I can not get it in the EZVIZ. In the camera menue the EZVIZ P2P button is on and it shows "online". When I go to the EZVIZ7 my camera is detected in the LAN but it is not accepted to add it. WHY? What does it need to... -
T
EZVIZ7 does not accept my camera
my camera is a DS-2CD2032F-i downgraded to 5.2.5. In the camera menue the EZVIZ is accepted and shown as online (platform access EZVIZ p2p is OK and online. When I now start the EZWIZ7 web it can detect my camera as LAN camera but it does not allow to add it ( I get a hint "device can not be... -
T
Custom Firmware Downgrader 5.3.0 Chinese to 5.2.5 English
which p2p do you suggest as substitute for that? -
T
Custom Firmware Downgrader 5.3.0 Chinese to 5.2.5 English
FUN-tastic ...it worked on switching off the firewall.....so happy, thank you very much for all.... Now the only problem is to get it to the p2p system. The EZVIZ says "the device can not be added". The cam is detected by EZVIZ and ezviz is enabled in the menue. What is wrong with it? (is it... -
T
Custom Firmware Downgrader 5.3.0 Chinese to 5.2.5 English
it can not work ( it seems not to have access to the 64) tftp server 192.0.0.128 initialized and then I only get the messages device 192.0.0.64test tftperver again and again ( even after unplug/plug the camera) -
T
Custom Firmware Downgrader 5.3.0 Chinese to 5.2.5 English
Hello! I updated my DS-2cd2032F-I that came with V5.3.0 (chinese probably) to I thought newer version 5.3.0 from the hikvision web. I thought to make it better updating the firmware.....what a mistake.... the firmware update went up to 100%, it rebootet and now is hanging. It doesn't show any... -
T
DS-2CD2032F-I hang up after FW update
inside the speedport (in the menue "connected LAN devices) -
T
DS-2CD2032F-I hang up after FW update
when I plug the cam to the router, the router shows a LAN connection with an ipv6 adress but no ip4 adress. I can ping that ipv6 and it responses as it should but I can not reach the camera via browser and it is not shown on sdap and odm...strange, isn't it? -
T
DS-2CD2032F-I hang up after FW update
if I look into my router, there is only a IPV6-adress for it, no IPV4-adress. When I ping the IPV6 I get OK result (send 4 packages, receive 4 packages, no loss, min time 2ms , max time 4ms, average 2ms) .....but that's all, no other I get no results. I tried the extra voltage supply ( no use of... -
T
DS-2CD2032F-I hang up after FW update
what would you suggest to do? -
T
DS-2CD2032F-I hang up after FW update
I have another IP-cam (in my storage from a friend who installed a NVR-system and doesn't use that one) and that one is detected immediately by the Onvif device manager...so there is no problem with the poe switch or voltage of it or cable break. That all is OK, just the cam does not want to be... -
T
DS-2CD2032F-I hang up after FW update
no, that I didn't. But it worked before my "shit update try" perfectly (only it was not possible to bring it to EZVIZ (scanning the QR code on it bring a chinese www.ys7.com , EZVIZ could find my cam and in the cam I could find a menue accepting ezviz but ezviz could find my cam but said, cam is... -
T
DS-2CD2032F-I hang up after FW update
no chance to see it on sadp, not when connected directly to computer, not when connected to router, not when computer fixed ip, not when computer variable ip -
T
DS-2CD2032F-I hang up after FW update
yes, on/off/on/off, sometimes doubleflash or longer indicator light on, sometimes on/off/on/off in this halfsecond step Putting it directly to the router I can not get on it either. (fixed IP of computer) -
T
DS-2CD2032F-I hang up after FW update
Yes, ir lights up when power is on. My switch only has one indicator for each plug and it flashes when I try to look for connection. How to try other way, how to dhcp? the camera is teasing me. Is there any other chance to get it back to life? -
T
DS-2CD2032F-I hang up after FW update
No chance, additionally reset adress to 64 by pushing resetbutton for 30seconds while power up does not help. Only indicator flashing on the poeswitch and then timeout error on connection -
T
DS-2CD2032F-I hang up after FW update
nothing happens, not via browser or odm or sadp. Only light indicator on poeswitch shows that it tries to get connection but no possibility on both mentioned ip adresses :( do I have to throw the nice camera in the waste bin? -
T
DS-2CD2032F-I hang up after FW update
The update was done on the system (login via its ip 192.168.2.10, computer was on fixed ip 192.168.2.1) so the latest ip of camera was 192.168.2.10 but after update 100% it rebootet and hang up. Now I have no chance and I don't know a way to make an update (e.g. thid downgrade to 5.2.5) . I... -
T
DS-2CD2032F-I hang up after FW update
Hi! Before the camera hang up, it had another ip. For use of tftp I just change computer to 192.0.0.128 and switch off wlan and shut down firewall. But there is no progress in tftp, just the first line ( even after unplug plug camera)....what to do? -
T
DS-2CD2032F-I hang up after FW update
Hi! Yes, same Network, cable ftom computer to poeswitch and switch to camera. Plug out and plug in rj45 for unpower cam. Ip of computer to the O O128,of course -
T
DS-2CD2032F-I hang up after FW update
the tftp can not work (after message 192.0.0.128 initialized ....nothing happens) -
T
DS-2CD2032F-I hang up after FW update
Hello! after update my 2032F-I cam (originally on the carton I read V5.3.0_150513) progress went up to 100% then it rebootet and now I have no access to it and it isn_t shown in SADP. I updated it cause I wanted to bring it to EZVIZ but that denied to add it. If I scan the QR on the cam it shows...