Search results
-
AI: not responding
Hello, I'm running CodeProject AI v2.9.5, and often see the error AI Not Responding at random times on some cameras. Does anyone know what the cause may be? Thanks -
Frame Bottleneck
Hi all, I've noticed that cameras have started to show a "Frame Bottleneck" when I have a remote android client "IP Cam Viewer" connected to monitor all cams, when I close the client the Frame Bottleneck disappears. I've had this configuation working well for quite some time, not added any new... -
Fine-tuning a trigger at night
Hello, I have 2 zones setup A and B, I've setup to receive a notification when a person or car is found in Zone B. This works great during the day, however sometimes at night when cars drive past their headlights are triggering motion in A and B, and the AI in Zone B is detecting the parked...- BassTeQ
- Thread
- Replies: 6
- Forum: Troubleshooting
-
Geofencing on android not triggering until the BI app is opened
Hi all, I've configured geofencing, and a push notification whenever I enter/exit the area. This works well if I leave the BI app open. However when the app is in the background it doesn't trigger the geofence change, until I open the app again. I've configured the app so; location is always... -
Geofencing on android not triggering until the BI app is opened
Moved the question to Geofencing on android not triggering until the BI app is opened- BassTeQ
- Thread
- Replies: 0
- Forum: Troubleshooting
-
Record any motion, but only trigger push when confirmed it's a person
Hello, I have a camera at the front door which I'd like to configure in such a way that ... Motion from anywhere the zone (entire image/frame) will trigger a recording Trigger a push notification only when an person (using AI) crosses from zone B>C Just trying to work out the best way to do...- BassTeQ
- Thread
- Replies: 4
- Forum: General BI Talk
-
Scheduled Image Switch
Hello, I've been using a schedule to switch between the different image profiles in v5.5 of the firmware, its working well. However on a similar camera running 5.6, it appears they've changed something, and the way you schedule the switch is different. In 5.6 the period start & end times don't... -
New NVR using existing cameras from old NVR
Hello, I'm upgrading an old NVR, some of the cameras were connected directly and some via IP. I plan on plugging all these cameras directly into the new NVR, do I need to reset any of the cameras or passwords etc so they're easily added to the new system? Cheers -
DS-7608NI-SE/P can't add new camera
Hi all, I'm helping someone who has the NVR DS-7608NI-SE/P, I've added a new camera DS-2CD2365G1-I to the system for them, the camera works fine stand alone from the browser, but its always showing as OFFLINE in the NVR camera management. I've tried using both HIKVISION and ONVIF protocol, but... -
2-way audio with HIK camera
Hi all, I have a Hikvision camera DS-2CD2386G2-ISU/SL which has 2-way audio, using their HIK app 2-way works great! However, Is it possible to get 2-way audio working with the BI app? Currently I can only hear what the camera microphone picks up, I'm not able to talk back. Thanks!- BassTeQ
- Thread
- Replies: 14
- Forum: General BI Talk
-
Help getting DeepStack working
Hi All, Using the latest version of BI, I've downloaded and installed DeepStack to C:\DeepStack, I'm able to run Deepstack.exe manually and see the application running and accessible on the port I set "84". I've set PI to use local IP and the specific port, click on start server, BI now shows... -
Help with hardware - intel quick sync
Hi, Looking at upgrading my BI PC, and would like to ensure it's intel quick sync compatible for hardware encoding. The CPU ( i7-10700) says its supported, but the motherboard (Gigabyte H470 HD3) doesn't specifically mention it, it does have onboard Intel Graphics (Intel® UHD Graphics 630)...- BassTeQ
- Thread
- Replies: 6
- Forum: General BI Talk
-
Temp keeps resetting to Imperial
Hi, it looks like the setting for "Mertic/Celcius" won't stick between restarts. If I change it in the app it remains and works as expected, however once the app is restarted I need to manually go and click the "Metric" option. Thanks- BassTeQ
- Thread
- Replies: 0
- Forum: Blue Iris Tools
-
Nvidia CUDA acceleration not working
Hi, using BI v4.8.6.3, I'm trying to get hardware accelleration working on my system. I have a GeForce GT 430, when I enable "Nvidia CUDA acceleration" in BI, and check the GPU usage in task manager and I don't see any "video decoding" usage. MB : Gigabyte Z68X-UD4-B3 CPU : i7 2600 GPU : NVidia...- BassTeQ
- Thread
- Replies: 10
- Forum: General BI Talk
-
BlueIris.exe CPU 70% usage
Hello, been running BI for quote some time, just noticed that the CPU (i7-2600k @ 3.4GHz) is running quite high sitting around 70% for BlueIris.exe, mem usage for BI is 2.5GB I'm running 5 x IP Hikvision, Direct to Disk recording enabled. Cameras are running a mix of 15fts and 20fps. Any ideas...- BassTeQ
- Thread
- Replies: 9
- Forum: General BI Talk
-
Animated GIF as camera source
Hi all, I have some animated gif's (weather radars) that I'd like to be able to use as a camera source, although it doesn't seem to animate in BI, any ideas?- BassTeQ
- Thread
- Replies: 69
- Forum: General BI Talk
-
Remote clients, path to video feed
I have a few different remote clients on Android and iPads that pull images from my BI server, is there any way on the BI side to determine what image path is being used to access a video feed? Eg /image/cam_short_name Some clients are quite sluggish and I'm guessing its because they are...- BassTeQ
- Thread
- Replies: 0
- Forum: General BI Talk
-
Upgrading from bricked 5.10
Hi all, I have a DS-2CD2332-I cam which was bricked some time ago, thought it may be worth trying to get it up and running again. I have the firmware file 5.10firmware.dav (hacked Chinese) which I can uploading using tftp. Once I get it up and running on 5.10 whats the recommended steps to get...