Search results
-
S
Any way to filter alerts based on PTZ preset?
I didn't see a parameter for zone that the motion ended up in which is why I said "B" parameter. i.e. a cloned alert for each zone where you pass in a hard coded string as a parameter to identify the zone...along with the preset variable. -
S
Any way to filter alerts based on PTZ preset?
10 clones is a lot. Does BI treat those as separate streams? Hopefully not. What BI really needs is an action list override per preset in addition to the existing zone preset overrides. If I were going to approach this problem trying to auto track based on zones and zone crossings, I think I I... -
S
Any way to filter alerts based on PTZ preset?
I suggested this as an optimization and it looks like it was just deployed today in 5.5.1.11. -
S
If your Reolinks stopped working with 5.5.1.9
5.5.1.10 just came out and it's working fine with that one so whatever it was they fixed quickly. -
S
If your Reolinks stopped working with 5.5.1.9
It's an RLC-410 with the older IPC_3816M hardware. I have an RLC-423 PTZ as well with the same chipset but it doesn't seem to be causing any issues. The other 3 all have newer chipsets. There's something about this one 410 that is causing BI to blow up on 5.5.1.9. Everything is fine on 1.7. -
S
If your Reolinks stopped working with 5.5.1.9
Rolling back to 5.5.1.7 will fix it. 14 of my cameras are Reolinks and 5.5.1.9 results in the 5 Reolinks all getting no signal and the BI UI freezing over and over again. Those 5 camera failures appear to be tied to one specific Reolink camera that when disabled the other 4 work fine with... -
S
Exposure Level missing on newer camera....
I've just upgraded from a DS-2DF8236I-AEL running V5.4.9 build 170123 to a DS-2DF8236I5X-AELW running V5.6.0 build 190724. I'm having a problem with license plates washing out at night. The older camera has a setting "exposure level" that I was able to adjust down so that license plates are... -
S
Any way to filter alerts based on PTZ preset?
I figured it out. The AI tab can be filtered on zones. Zones can be overriden for each preset in the PTZ tab. An example. First configure the preset that you want the camera to return to after some amount of inactivtiy. In my case it's preset button 6 mapped to the camera's preset 50. This is... -
S
Any way to filter alerts based on PTZ preset?
It's Blue Iris. So often there's a solution that just doesn't seem obvious because it's hidden somewhere else. Perhaps if can be done it's part of the PTZ tab preset override and detection zones? Hmm no. Picking a different zone for a preset would allow me to completely disable motion detection... -
S
Any way to filter alerts based on PTZ preset?
I never said that. I AM using deepstack for that camera but I only care about alerts for people when the camera is on a specific PTZ setpoint. -
S
Any way to filter alerts based on PTZ preset?
I still want all alerts shown in time timeline when facing out which is why I unchecked the "hide canceled alerts from timeline". I only want notification actions to be triggered for people when the camera is facing inward towards the breezeway. -
S
Any way to filter alerts based on PTZ preset?
I have a camera that points out to the street in an area that I don't want any AI alerts at all. That camera reverses 180 degrees pointing into my breezeway whenever one of the doors opens or motion sensor activates. It's only during this preset that I want to detect and notify on people....or... -
S
How to always trigger recording on motion but only get notified when DS detects objects?
So this works fine for the desktop app but the mobile app only shows confirmed alerts in the cameras view. The only way to see the canceled alerts is going to the alerts but those are organized by time when I just need to see all the last alert for each camera. -
S
How to always trigger recording on motion but only get notified when DS detects objects?
I think my other issue of not getting as many motion alerts could this this? https://ipcamtalk.com/threads/object-travels-pixels-setting-with-substream.59130/#post-598308 -
S
"Object travels (pixels):" setting with substream
I think I just figured out why I'm getting so many fewer motion events with substreams. Do I need to lower this setting proportionally to account for way fewer pixels on the substream? i.e. if I had it set to 100 pixels when the image was 1920x1080 but now it's just 640x360, then do I need to...- sorka
- Thread
- Replies: 1
- Forum: Troubleshooting
-
S
How to always trigger recording on motion but only get notified when DS detects objects?
OMG, how did I not see that????? -
S
How to always trigger recording on motion but only get notified when DS detects objects?
How can I see all alerts without having to change between "alerts" and "canceled"? That said, there's nearly nothing in canceled the 30 things that happened in front of the house last night that would normally trigger a recording didn't have anything recorded let alone cancelled alerts. When I... -
S
How to always trigger recording on motion but only get notified when DS detects objects?
If I'm reading the help file correctly, it should already do what I want when camera Record Tab Video "When Triggered" is set vs "When alerted" which says: "When alerted. Much like When triggered, but video is only recorded when the camera is in a triggered state and the alert has been confirmed... -
S
How to always trigger recording on motion but only get notified when DS detects objects?
Just upgraded to BI a few days ago and have turned on DS for most of my cameras. I just realized I have a huge problem. I'm no longer getting recordings on regular old motion detection. I'm only getting recordings when DS detects one of the filtered object types. I still want the alerts for all... -
S
Pre-record buffer not working when using substreams
Total cpu is typically around 5% with BI taking 2.5%. That's with 14 cameras. Of course it used to be 25% with BI4. -
S
Pre-record buffer not working when using substreams
OK, so I DO want that feature. So that's probably the reason it's enabled by default. -
S
Pre-record buffer not working when using substreams
Ahh. That's good to know. I'll disable them. -
S
Pre-record buffer not working when using substreams
Also even if the i-frame interval was long, you'd still have events where you'd catch the i-frame within the pre-record trigger time and well before the event start time. -
S
Pre-record buffer not working when using substreams
The camera under discussion is the one labeled Left Front at 192.168.1.81. There's no help for the Reolinks at 0.25. -
S
Pre-record buffer not working when using substreams
Also disabling record dual streams makes it work again as well. -
S
Pre-record buffer not working when using substreams
Not sure what you mean? General tab under camera settings for that camera or something else? -
S
Pre-record buffer not working when using substreams
Yes. I'm familiar with this change. That has nothing to do with the fact that the pre-trigger buffer is still not actually recorded. AGAIN if I turn substreams off it works fine. Video with substream turned on: -
S
Pre-record buffer not working when using substreams
I have NEVER recorded continuous. That would fill up my hard drive very quickly. I have video alerts going back months. I have rebooted multiple times. I've stopped and started the BI service multiple times.