Search results
-
DS-2CD2546G2-IS without mounting plate
Does that camera not have mounting holes on the bottom or does it have an area that rotates into a plate? My camera while not that model but is within that line of cameras has mounting holes where you remove the top cover of the camera like you will be resetting the camera or adding in a Mico SD...- Revo2Maxx
- Post #2
- Forum: Accessories
-
Amcrest AD410
Yes that is what I am talking about.. Others that have and my self as well seeing I like to Tinker and troubleshoot things.. I have tried to make some little adjustments that should have no impact on the cameras ability to function but in fact caused my Ad410 to go into a boot cycle. While I can... -
I screwed up...broke the plastic part that accepts the rj45 jack
Yes as in picture, most come setup so the parts can connect even to cables with ends already in place like yours. Adding that part will keep the 2 ends together. Rubber insert squish onto cable and will hold it into connector. I have some the top clip broke off and using the waterproof ends...- Revo2Maxx
- Post #5
- Forum: Camera Installation Questions
-
I screwed up...broke the plastic part that accepts the rj45 jack
Good news is the important part is still there. Now take the Water proof cap, Take the screw part put over the cable, now take the rubber gasket and put on in front and slide the boot over. Put the rubber in the end with all the teeth and loosely tighten the screw part, Then slide into the RJ45...- Revo2Maxx
- Post #2
- Forum: Camera Installation Questions
-
Amcrest AD410
To be honest the AD410 and the AD110 should not be changed from any 3rd party software or hardware. To be honest not even from the Amcrest Software that it says things can be changed using the Amcrest Ip config tools but if you do it will make the camera unstable and do a Constant Reboot. Then... -
UNIFI—The Best Option...?
Something you have to ask yourself.. Why don't they say what F/Stop that camera is using? My guess is a f/2.0 and with as stated before the sensor is great for 4mp and sure I have some 4k cameras with that sensor and worse even but with better f/stop and so low light is ok not great.. Then one...- Revo2Maxx
- Post #3
- Forum: IP Cameras
-
Dahua WizColor COMING SOON!
Anyway love to try new things lol so upgraded to new FW, now gives Stay Detection and Loitering Detection as IVS rules that can be added, before only tripwire and intrusion was offered. Looking at update details says this as well and some other things not sure I understand yet. Edit: Something... -
Dahua WizColor COMING SOON!
02-21-2025 current FW for the camera or is that just the released FW? -
My IPC254EB-DX22GK-I0 is damaged?
Well this is fun.. I have not repaired any Uniview cameras with bad Uboot and methods that work on other cameras just caused me to hard brick this camera.. I no longer even have a uboot shell anymore lol.. Well this is really fun. So right in the middle of downing a image update that I thought... -
My IPC254EB-DX22GK-I0 is damaged?
Well darn.. Not sure how to recover it now lol.. Data below is from Putty, It cycles every 3 to 5 minutes.. I can not stop it from doing the full cycle and nothing happen from key presses. [WDT] Enalbe WAT... -
Replace fan on Q6125-LE
Replaced a good few fans in my PTZ cameras over the years. One of my Samsung cameras was hard to find the right fan and I had to install one that was the right voltage and seized squared but where I had an issue was the fan in my case had a very small depth and seeing the fan was smaller then... -
Dahua WizColor COMING SOON!
Hate it when they keep the same model numbers as older cameras with inferior sensor size.. I mean I seen Amazon selling one that looks like the new they are calling it an S5 model but has the 1/2.8in sensor even though it has the top mounted red/blue leds. How is anyone supposed to know they are... -
My IPC254EB-DX22GK-I0 is damaged?
Well that didn't work, lol. I asked Uniview for FW for my camera, they were nice enough to send me one dated 2025, mine was from 2023, but thought they knew what they were doing. Now camera is dead. Powers on, shows network data but now iris is closed and never opens or anything happens when... -
Nosey neighbor?
My guess is they didn't mind the other cameras seeing they are looking away form his property. He might have had an issue just didn't trip out about it because the cameras were not facing his house. Now with the Turret under the roof pointing at his house he thinks you want to watch him lol I...- Revo2Maxx
- Post #43
- Forum: Pics & Videos
-
Adding cameras to NVR via single cable
So here is one of my switches mounted on 2 POE NVR, far right are the 2 uplink ports 1 going to bottom NVR and second going to my giga lan 24port switch. In my case you can see 8 poe connected devices in orange with green for data, right 2 green is for data on the uplink ports. I have another... -
Adding cameras to NVR via single cable
Your NVR should have the Option for Bridge Mode. Loads of people wouldn't use it but in your case. I would.. Few things to keep in mind.. First you will need to setup all your cameras for your Local Lan IP range, This means that all your cameras will be open to your LAN.. Next you will want to... -
Remove login on Dahua network keyboard and automatically display camera
Because of the security issues that a Keyboard can cause Dahua has Enabled the Complex setup to keep the end user better secure.. Way and easy setup for Lab type setup if you will is to setup your password with something that is easy and fast to enter into the keyboard. like Aa123456! That is... -
how to block wind rumble physically - wheres mic
Well I do have some of mine Enabled on cameras that the wind hits the camera from left to right and if it wasn't enabled it would be nothing but wind.. Right now looking at a day with a good amount of wind and while there are some Gust of wind that makes it well known that it is windy out. Able...- Revo2Maxx
- Post #9
- Forum: IP Cameras
-
Can't seem to connect an Axis camera to Annke NVR
So a couple of things. My camera while I can use as 1080P it is a 6mp zoom camera.. So to reset the factory if you need to, remove power, Press and hold button, restore power and keep holding for 20 to 30 seconds until the light blinks amber.. However keep in mind that you don't have a default...- Revo2Maxx
- Post #6
- Forum: NVR's, DVR's & Computers
-
Homeowner says someone was following her.. uh huh. Ooppss She's Right!
Might be ICE/HSI and FI could be for Feild Investigator or Federal Investigator? Seeing the Window Tint FL Chapter 493 don't apply to LE or FI and other GOV leased vehicles? Just a guess.. Also I think it might be 2019 to 2023 in year with different later 2023 for 2024 that has a different back...- Revo2Maxx
- Post #19
- Forum: Camera Captures
-
Can't seem to connect an Axis camera to Annke NVR
As stated double check that ONVIF is enabled and if your camera is like mine you might want to also enable Adaptive Stream.. If I don't enable that on my Axis camera I can add the camera to my NVR but it will kick off all other cameras because the stream is to much of my Amcrest or Dahua NVRs...- Revo2Maxx
- Post #3
- Forum: NVR's, DVR's & Computers
-
DS-KT1804AMF connect error hk.
Personally don't know how to access that device. The manual talks about different things. It might be that you have to access the device with port 8000 as it talks about how to start it using SADP on 192.0.0.64 and port 8000 maybe that is the correct web Port as well>? Again in the manual it... -
DS-KT1804AMF connect error hk.
Don't think it has a WebUI.. I would look at the connection type in the manual. Talked about matrix and other command QR codes you need to scan for>? https://pinfo.hikvision.com/hkwsen/unzip/20231116144511_70958_doc/ -
Hacked DAHUA cam and added that names
Personally if your system has been Hacked then you will want to Reset the cameras and anything they are connected to.. Making sure to change the Passowrrd that you used for all devices and make sure that UPnP isn't enabled on all devices and to even make sure that it can't be enabled by accident... -
how to block wind rumble physically - wheres mic
.Is your Noise reduction enabled in the camera? I mean yeah I understand that it reduces the distance of the Mic pickup but can help with wind as well? I mean sure some of my camera with it disabled I can hear things 200+ feet away but not everyone wants to hear things that far form cameras...- Revo2Maxx
- Post #6
- Forum: IP Cameras
-
My IPC254EB-DX22GK-I0 is damaged?
Understand, i am CCA free. All against the idea of people being taken advantage of saying cable is TIA/ANSI with CCA when it couldn't be certified and all the havoc it can take on cameras. So many people out there just don't know. Like most of the ones that have there devices exposed to internet... -
My IPC254EB-DX22GK-I0 is damaged?
Undstand, that is why it is odd that this camera is like this.. I have access to the Cameras WebUI, I have access to everything as if the camera was working besides what makes the camera what it is.. Being stuck in 720P and no Ai and no access to zoom controls from WebUI or from my Alibi NVR is... -
My IPC254EB-DX22GK-I0 is damaged?
Thank you, That list doesn't have a FW for my camera.. I will try Email and see if I get the same answer I got the last time I asked them for some help lol.. I hope they will provide a FW to reset the camera.. Strange that Button Reset and software reset does nothing lol. I mean it resets the... -
My IPC254EB-DX22GK-I0 is damaged?
Still sees it as the right camera? I just don't understand why it is not working or how the thing over heated and killed the current running FW with all the export info it can do crazy that it don't have a good FW that someone could use to fix when they have an issue like this? -
My IPC254EB-DX22GK-I0 is damaged?
ok I was able to access it this time but still seems messed up? Not sure how to get Uniview to send me a FW to add back in and see if that works.. Looking in the logs on the export things keep saying the FW needs to be reloaded..
