Search results

  1. J

    How do I setup motion detection on my PTZ5A4M-25X

    shutter priority was checked - thats on , Ill turn it off - ? just turned it to Auto - dont know how that was enabled. - if I dont know what something is - I usuassly keep it to auto
  2. J

    How do I setup motion detection on my PTZ5A4M-25X

    dither seems to be only found in the alarm section of the events page in the web view I have all sections turned off in this events page- is there a way to lower sensitivity in the IVS setting? also just checked - no md is enabled
  3. J

    How do I setup motion detection on my PTZ5A4M-25X

    this bugs me - the cam is still looking for the ghost, and zooming in on the plant.. happened a dozen times last night. also noticing the cam's i.r. flashes some every once in a while. The cam loses its (wideout1) preset and then I get no tracking, only sometimes I get the event. (in B.I.)...
  4. J

    How do I setup motion detection on my PTZ5A4M-25X

    ir cut filter, damn abbreviations :smash: I have 3 other cams out in that area, covering what this one ptz is doing now, well two of the three are almost irrelevant now. There's plenty of I.R. floating out there, plus an i.r. illuminator, It's is dark here at night. near the side edges of...
  5. J

    How do I setup motion detection on my PTZ5A4M-25X

    I will be digesting this slowly and thoughtfully putting your knowledge to work for me. there's a bunch there to consume, but I get it. on this day/night tab - what is electronic vs. icr ? I set up the time plan map kinda generically. 7:30 am - 7:30 pm for now ( for the year - will tune it up...
  6. J

    How do I setup motion detection on my PTZ5A4M-25X

    I went to 40 on the tracking target, I have a mailbox across the street about 200 feet away.
  7. J

    How do I setup motion detection on my PTZ5A4M-25X

    dropped it to 20 and 15 for iframes. Thank you for everything. I need to keep tweaking this out, at night it drops off some on the detection.
  8. J

    How do I setup motion detection on my PTZ5A4M-25X

    here,s the video settings on the cam
  9. J

    How do I setup motion detection on my PTZ5A4M-25X

    so thats what that ratio sizing is for .:)
  10. J

    How do I setup motion detection on my PTZ5A4M-25X

    it was a longer video, don't know why its cut a little short
  11. J

    How do I setup motion detection on my PTZ5A4M-25X

    result here.. I hope it sticks.. B.I. has captured it.
  12. J

    How do I setup motion detection on my PTZ5A4M-25X

    in the events page - all 5 pages, everything is set off ..
  13. J

    How do I setup motion detection on my PTZ5A4M-25X

  14. J

    How do I setup motion detection on my PTZ5A4M-25X

  15. J

    How do I setup motion detection on my PTZ5A4M-25X

    B.I. was/is set to only get onvif events from the cam, no motion on B.I. on the cam dither is set to 2, (based on some in from another thread) -unless I interpreted it wrong to go that low :thumbdown: Smart IVS is staying set to on.
  16. J

    How do I setup motion detection on my PTZ5A4M-25X

    IVS only now on my static preset target, human and vehicle I get alerts, but no tracking now as I walk around. target tracking size, 20 I was getting tracking before. I checked the cam itself also.
  17. J

    How do I setup motion detection on my PTZ5A4M-25X

    OK - I'll adjust - and keep an eye on it.
  18. J

    How do I setup motion detection on my PTZ5A4M-25X

    I'll hunt it down, and yes I always have bugs flying around. I only have onvif events enabled in B.I. on the cam, MD is enable because SMD needs it on. on MD area, I have nothing highlighted. I am using tripwire also.
  19. J

    How do I setup motion detection on my PTZ5A4M-25X

    weird ghosted movement and alert. what might cause this? youtube link - first time posting anything to utube- I may not know the best way to convert and upload the clips. I tried , it was private, now to make it public somehow. it happened last night about 6 times.
  20. J

    How do I setup motion detection on my PTZ5A4M-25X

    Thank you..
  21. J

    How do I setup motion detection on my PTZ5A4M-25X

    Can you save your settings to a file, so that if you screw things up, you can revert back to your working settings? I keep fiddling around with mine, and if you get lost and tick just one other seemingly minor setting, it can blow your mind. :facepalm: There is a lot of stuff going on in this...
  22. J

    Review: Dahua 8MP / 4K 25x Starlight IR PTZ - PTZ5A4K-25X / SD5A825GA-HNR

    the only other firmware I could find is Release Notes from Dahua is Taurus V2.820.0000013.5.R.230301
  23. J

    Review: Dahua 8MP / 4K 25x Starlight IR PTZ - PTZ5A4K-25X / SD5A825GA-HNR

    slowly learning through the web gui. it seems to be performing well. lots of settings in there, and some unintuitive procedures to perform, because I have to expand on features that are not apparent at first. I'm using the (3M) video setting for the scene I'm set to, cause I can't unzoom far...
  24. J

    Review: Dahua 8MP / 4K 25x Starlight IR PTZ - PTZ5A4K-25X / SD5A825GA-HNR

    just erected mine up today -SD5A425GA-HNR PTZ - it is yuge! :wow: - its working off of my secondary poe+ switch - now to figure out the tracking part of this thing. my first ptz.
  25. J

    Cameras randomly dropping out on B.I.?

    looks like a bad cable :( but I have another dozen. Now its working :) alas, that first camera that went out on the second connected extended switch is still not working :( but the other cam is :) I'll figure that one out after I come back from vacation.:idk: You guys are GREAT :headbang:Thank...
  26. J

    Cameras randomly dropping out on B.I.?

    I'll try a new cable first - getting a yellow flasher on that one.- pc to switch - not green
  27. J

    Cameras randomly dropping out on B.I.?

    I have a dual network. second intel network card in my pc and separate ip address on my pc for my cameras I mentioned earlier that all has running great for a yr. and a half.
  28. J

    Cameras randomly dropping out on B.I.?

    I've done nothing new with my setup for quite a while, and now random cameras are going off line, and sometimes coming back on. Think I have a switch going bad? 3 cams on one switch, have another switch connected to another port, with 2 on that one. At first, one of the 2 on the extended poe+...
  29. J

    Important! EmpireTech Official Website Active

    omg! that thing is YUGE!
  30. J

    Important! EmpireTech Official Website Active

    Yes, and it happens that it just was delivered.. :) It probably was in the back of his little jeep, and he forgot to look back there yesterday. I wont be able to play with it for a week though, as I am taking a little jaunt out the hills/woods for some r&r
Top Bottom