Search results

  1. D

    Camera placement for new house

    Thank you! Also don't worry about that tree, it's not going to be there in real life. I think I'll head out with my phone and a selfie stick to get a general idea of the angles and POV. Do you expect that I'd use all locations, or is the thought that I may be able to eliminate some?
  2. D

    Camera placement for new house

    I'm not sure I can swing a separate AC unit, but that closet backs up to a laundry room where I was planning to vent the hot air. Then I can pull cooler air from the room with the closet. The nice thing though is that part of the house has its own HVAC so I can hopefully take advantage of that...
  3. D

    Camera placement for new house

    There's a closet I'm planning to use for this purpose. Good call on the fiber! :)
  4. D

    Camera placement for new house

    Here's a pretty accurate render. I think we have until sometime in August to spec any network drops, so yes, I do have some time. I'm waiting to find out what options we have around conduit. Thanks again!
  5. D

    Camera placement for new house

    I understand about the doors and that's a really great example. I think I can get good coverage from the porch. I'm not too worried about the guest door. Oops, sorry. No it's not built yet. That was from the model to give you a visual. I could head out to the model with a test camera, but I...
  6. D

    Camera placement for new house

    Thank you both, I'm not sure if this is any better. I'm struggling to find good balance and it feels like I'm overdoing it? @mat200 Thanks for the call out on running 2x network cables to each location. For the cameras under the patio, porch and guest entrance, should those be mounted on the...
  7. D

    Camera placement for new house

    I'm guessing the yard along the left side of the house and the area behind the garage?
  8. D

    Camera placement for new house

    We're having a new house built and I'd love any feedback on camera placement before we have the wiring done. It's a typical suburban housing development with houses next to and across the street. There's a different community behind us (a gated mobile home "estate"). I've attached an image with...
  9. D

    Why Ubiquiti/Unifi over Dahua?

    Yeah, I mean that's a game changer. Aside from cameras, the Unifi NVR/Protect stuff is probably what I'm going to recommend for him. Thanks for confirming what I thought.
  10. D

    Why Ubiquiti/Unifi over Dahua?

    I'm helping a friend with cameras for his new house. I've always recommended Dahua, but was wondering if there's a reason to look at Unifi cameras? I feel that Dahua's are cheaper and have better if not comparable image quality (depending on the model), but wanted to see if there's something I'm...
  11. D

    Configuring alerts and logging of humans/vehicles

    I've got a NVR8CH-AI with three IPC-T54IR-ZE-S3 monitoring a driveway and alley. I've setup an IVS tripwire for the driveway and am receiving alerts in DMSS. I don't want to be alerted on every car or person that passes by in the alley, but would like to be able to go back and review footage if...
  12. D

    Camera placement and recommendations

    Oh, I'll have to give that a try next time I'm over there. Thank you!
  13. D

    Camera placement and recommendations

    Thanks again for all of the help! We ended up going with three cameras for now due to budget and installed things over the past few weeks. My father-in-law was a pipe fitter and he had a good time helping me run the ethernet cable. Much easier than pipes! (I'm standing on a ladder, the gate...
  14. D

    Camera placement and recommendations

    That's a great thread! I saw it the other day and it was really eye-opening. So if I understand, verifocal is helpful in dialing things in or having adjustment, but if I knew specifically I needed a zoom/FOV, I could go with a fixed?
  15. D

    Camera placement and recommendations

    Thank you, this is very helpful. I'll be testing positions with a T5442T-ZE, but need to talk to them about their goals for the front and sides of the house. While there are motion sensing lights in some places, I'm not sure if they want to convert those to always on so I'd be hesitant to go...
  16. D

    Camera placement and recommendations

    After reading through @wittaj's thread, I ended up ordering a T5442T-ZE from Andy's Amazon store. This way I can walk through positions with the family member and show them the options for the back area.
  17. D

    Camera placement and recommendations

    Thanks, that was very helpful. I didn't realize the difference between Amcrest and Dahua. That's good to know, because I have a Dahua IPC-HDW5231R-ZE that recently died and I've been looking to replace it. I'll spend some time looking at the options and report back.
  18. D

    Camera placement and recommendations

    Hopefully this is the right forum for this. A family member asked for some help choosing and installing cameras at their house after two incidents regarding someone going into the garage and backyard from the alley. I tried my best to create a diagram of the property and place cameras where I...
  19. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    Thanks, I'll have to check those out! I'm not really sure what happened, but it's doing a lot better today. I did downgrade the firmware to 180726 yesterday, but didn't follow up on it. We did have a quick power outage this morning and since then the pings have been a lot more reasonable and...
  20. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    Thank you. I'll see if I can try a repeater again this weekend. I hate to do that and I don't need another AP since coverage is great for every other device except the Door Bell. If not then maybe I'll look into the HSDB2, but would rather spend that money on an additional camera. So that's...
  21. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    Mine shows -73dBm (45%). But the UniFi dashbaord is complaining about latency and retries. I'm on firmware version 180809 so I'm not sure if that's my issue. I have it constantly streaming to my Synology NAS and that seems to be when there is latency. If I stop the streaming/recording it seems...
  22. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    I'm using Ubiquiti APs and did a site survey and ended up trying both 1 and 11 which are the least used in my area. I live in a town home complex so there's a lot interface. I can give a repeater a try, but maybe I just need to try the HSDB2. Have you used both?
  23. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    So I'm not sure if I just have a bad unit, but the latency on this thing is horrible; it frequently drops packets which is causing issues with my network and NVR. I know the reception on this isn't great, but my router is one floor up on the ceiling and I've tried adjusting channel and AP power...
  24. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    I've been trying to find a way to integrate this with Home Assistant so that I can have it detect doorbell rings. I came across the Zwave Nexia Doorbell Sensor. I did end up having to upgrade my transformer as the camera started rebooting (even after removing the sensor). I used the Hampton Bay...
  25. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    Modem (Fios) -> Ubiquiti EdgeRouter -> Ubiquiti UniFi AP. I have an ethernet jack in a room closer to the DoorBell, so I'll probably just add something there.
  26. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    Yeah I tried one temporarily and it helped a little. Kind of annoying since the AP sits directly above the doorbell on the next floor. Guess I'll go out and get a permeant repeater.
  27. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    I finally got around to checking and I have a 16V 10VA transformer. Will replacing it with a more powerful transformer help with the weak wifi reception? Aside from when I initially installed it, I don't seem to have issues with rebooting.
  28. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    Thank you both. So it stopped rebooting for now. I wonder if it's due to a weak wireless signal. It seems to be when I'm watching the live stream. As for the message, the good news is that if I just ignore my phone, it times out and there's no message at the bell. So if it's only when I decline...
  29. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    I'm definitely on 180726 and I'm getting the "subscriber is not available, please call again" message. I think you're right about the transformer. The strange thing is these are all brand new houses and most of my neighbors have Ring and Nest doorbells. I can check the voltage from the...
  30. D

    Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR

    So I finally got my Uniden unit from Amazon and upgraded to 180726. When I decline the "call" on my phone, I get the subscriber message. Is this expected? Also using two way audio seems to ring my door bell/reboot the device. :(
Top Bottom