Search results

  1. J

    DS-2CD4A26FWD-IZS/P recognition errors

    I found the issue with the frame rate. I had the camera set to full frame in the NVR thinking that was max frame rate, but obviously it's not. Every time I set the camera to 50fps at the camera through the web interface it defaulted back to the NVR setting. I changed the NVR setting to 50fps and...
  2. J

    DS-2CD4A26FWD-IZS/P recognition errors

    Also at night the frame rate drops from highest to 20 fps is that normal?
  3. J

    DS-2CD4A26FWD-IZS/P recognition errors

    Not sure if I'd get support from them as I bought the camera from Ali express. I am running Australia region firmware so it's not a Chinese camera
  4. J

    DS-2CD4A26FWD-IZS/P recognition errors

    It's a 50km area and on a corner. I'd say a Max of 60km average of 40.
  5. J

    DS-2CD4A26FWD-IZS/P recognition errors

    Hi wise people. I have set up my ANPR and have had it running a few days now. It's confusing 0 with 8, K with X and W with v. Could this be a range issue or a font issue? I am running the latest firmware 5.4.7 build 180629 running on NVR DS-7608NI-I2/8P. I have attached an example below.
  6. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    I have an 8mp bullet on the house and an lpr on the power pole out the front covering the road.
  7. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    You could leave the existing camera in place and mount the lpr beside it, or run some cable to a more optimal position for the lpr. Either way I'd keep the existing camera in operation
  8. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    Yes I believe I did
  9. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    Here you go. Need to use the password you were given by google when setting up NVR access in your Gmail 2 step authentication. As you can see I'm using Gmail to send to my yahoo email
  10. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    I think it needs to be done from the NVR as the camera doesn't have connection to the internet directly. I could be wrong but I couldn't get it to send from camera either
  11. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    Yes but I set it up on my NVR not the camera. I'll get a photo of the settings when I'm home later
  12. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    I bought the P version camera and this firmware downgrades the fps to 20fps. I have replied in another thread with the proper P firmware which fixed the problem. Not sure if you can use it on non P version though
  13. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    P.S. this firmware downgrade the unit from 60fps to max 30fps Do you have the /P model?
  14. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    As for Gmail I found this fix to work. It's a Gmail problem not a firmware problem. [SOLVED] Hikvision Gmail Failure
  15. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    That firmware downgrades the /P camera to 20fps. Only good for non /P version
  16. J

    Cameras with Built-in ANPR or LPR function

    I'm using DS-2CD4A26FWD-IZS/P with DS-7616NI-I2/8P NVR. I bought both from aliexpress, and both have been updated from the hikvision official website and are working fine. The people saying that ANPR doesn't work out of the box are correct, but the special firmware is available if you search...
  17. J

    DS-2CD4A26FWD-IZHS/P firmware

    After much searching I have found the correct firmware for DS-2CD4A26FWD-IZHS/P ANPR. I accidentally upgraded the firmware with the non P version and could only get a maximum of 25 fps. I installed the correct firmware and now I've got 60 fps again.
  18. J

    DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

    Can I ask where you found this firmware? Or is it best not to ask? I'm looking to buy a DS-2CD4A26FWD-IZS/P from aliexpress, the seller says no special firmware is needed, but I feel it probably is. Also I see your model had IHZS/P but the one I want is only IZS/P was the H a typo?
  19. J

    IP Cam constantly going offline.

    Yes. It seems to be staying on since I reconnected the D-Link camera to the NVR.
  20. J

    IP Cam constantly going offline.

    Well this is interesting. Plugged the old D-Link camera back in on the inside of the house. The Hikvision camera hasn't dropped out for 2 days now. Not sure if unplugging the D-Link somehow confused the nvr
  21. J

    IP Cam constantly going offline.

    Not sure what the standard is as I bought pre terminated cables. All I know is they are cat6
  22. J

    IP Cam constantly going offline.

    I had thought that could be a possibility, but it's a fairly new run and was working fine with a D-Link camera on it.
  23. J

    IP Cam constantly going offline.

    Hi all, I have a DS-2CD2655FWD-IZS 5MP which keeps going offline, although the com lights on the NVR port still flash. I have tried a different port with no change. I'm wondering if there is something in my settings that needs to be changed? I'm using a DS-7608NI-I2/8P NVR. And the network cable...
  24. J

    Playback freezing.

    Thanks that seems to have worked at this stage! Now I need to work out why my 5mp camera is dropping out daily.
  25. J

    Playback freezing.

    Thanks I have done that and I'll have to wait a few days I guess to see if the problem continues. Any idea on how to see the firmware version of the cameras? I have updated the NVR to V4.1.50 but can't see where to find what version the cameras are
  26. J

    Playback freezing.

    I have the NVR connected directly to the tv with HDMI. No computer involved
  27. J

    Playback freezing.

    Hi thanks for letting me join. I have a Hikvision DS-7608NI-I2/8P NVR with 1 DS-2CD2685FWD-IZS 8 MP and 1 DS-2CD2655FWD-IZS 5MP. I have 2 seperate issues. 1st is that when I have tried to view recorded video the picture freezes and the time counter goes quickly, pauses and goes quickly again. I...
View older results
Top Bottom