Search results

  1. R

    Question for the cable termination gurus here

    You are taking a crap load of errors for your upstream. That is usually a good indication of some issue closer to you then the office. Your noise margin and attention are all both above the threshold. Your max attainable and actual bit rate are to close together meaning you probably are set up...
  2. R

    Question for the cable termination gurus here

    Just for the hell of it log in to your modem and check out the stats. Look at all the line stat numbers and look at the errors and code violations. Then reset it and keep an eye on it. If you need I can tell you how good or bad the link between your modem and the local dslam is. Then you can...
  3. R

    Question for the cable termination gurus here

    I haven’t set up vpn on my cellular yet. Although I will soon. I do get an ipv4 ip on it and it’s been staying the same so far. I have IPSec vpn set up for the primary wan1. The cellular is set up on wan2 as failover. It kicks in fast enough that I don’t even notice while streaming or normal...
  4. R

    Question for the cable termination gurus here

    I haven’t seen any 5g modems as of yet. And I don’t think real 5g will be in many rural areas either. It just doesn’t go far so it’s more for high density areas Sent from my iPhone using Tapatalk
  5. R

    Question for the cable termination gurus here

    Might look into cellular. I’ve recently purchased a net gear cellular modem for 130 off Amazon then added a SIM card for a tablet to my unlimited plan. I did it that way because you can’t get hotspots on the unlimited plans. And so far it’s working but I use it for a backup anyway Sent from...
  6. R

    Question for the cable termination gurus here

    I understand your frustration. I work for at&t and have been working on dsl since pretty much the beginning. Besides being old outdated technology with old equipment the biggest issue is the trunks and support for it just arnt their anymore. Everything is getting pulled and consolidated. Trying...
  7. R

    Question for the cable termination gurus here

    Rj not rg. Sent from my iPhone using Tapatalk
  8. R

    Road Rage Incident results in shooting death

    Who uses trigger locks anyway? Sent from my iPhone using Tapatalk
  9. R

    Adding a Second HDD to Optiplex 7040 MT

    I have an optiplex 7040 mt and I can only fit 1 3.5” and 1 2.5”. I’m interested in how you can put 2 3.5” hdd in it. Sent from my iPhone using Tapatalk
  10. R

    Whelp... it finally happened to me

    Typically slashing tires is a revenge act. And being ten tires that makes a big statement. And you pretty much know who it is without seeing their face. She is obviously upset with you. Sent from my iPhone using Tapatalk
  11. R

    Frequently Loosing Signal

    I’ve had SD cards cause random los and reboot. Sent from my iPhone using Tapatalk
  12. R

    Whelp... it finally happened to me

    So why did she slash 10 of your tires? Sent from my iPhone using Tapatalk
  13. R

    Problem with vpn while on separate WiFi

    Ok so on my iPhone in the vpn settings I have the “send all traffic” turned on so I assume that basically means split tunneling is turned off. But for whatever reason I am still having the same issues. Sent from my iPhone using Tapatalk
  14. R

    Noisy hdd

    The drive is in a caddy in a dell optiplex. It didn’t start bothering me until I installed a 20u server rack in my media closet. The rack is mounted to the wall and the optiplex is on a rack shelf. Now it resonates into the studs and the entire wall. So if the house is quiet you can hear that...
  15. R

    Noisy hdd

    Yes, always noisy Sent from my iPhone using Tapatalk
  16. R

    Noisy hdd

    I’ve done the quick scan on it several times and it’s always come back good. The full scan was always going to take way to long as in days if I remember right. Sent from my iPhone using Tapatalk
  17. R

    Noisy hdd

    I have a 10tb 7200 purple and it is noisy. So much so I can hear vibration of it writing through the walls of my server closet. I’ve had it for maybe a year. The 4tb it replaced was quiet. It gets on my nerves Sent from my iPhone using Tapatalk
  18. R

    What router are you guys using?

    I recently got into unifi. Have a USG4pro, 16 port and 8 port Poe switch and some nanahd and aclite APs. I also have a couple of Nanobeam ptp going to my parents house about 1/4mile away with unifi switch and APs there also. Sent from my iPhone using Tapatalk
  19. R

    Problem with vpn while on separate WiFi

    Like the discussions going on here. I still haven’t done anything about it yet since there are only 2 places I must access outside WiFi that I don’t have cell coverage and I’m usually not there long. So about this split tunneling. I don’t see it even being an option on my iPhone vpn settings...
  20. R

    Problem with vpn while on separate WiFi

    Well I should have known better lol. I used the same subnet that we use at our different offices at work when I originally set up my network. I guess just out of habit. I just recently got the VPN at home up and running and the whole WiFi thing has me stumped. I’ll change my subnet probably this...
  21. R

    Problem with vpn while on separate WiFi

    Ah I feel stupid now. Didn’t even cross my mind. Thank you. Sent from my iPhone using Tapatalk
  22. R

    Problem with vpn while on separate WiFi

    Ok so I have a L2TP set up on my Unifi usg4pro and an account for it set up on my iPhone. While I am on LTE or 4g cellular and connected to my vpn server I have no issues accessing my BI server through the BI app and also my UnIfi controller from the unifi app. Everything works as planned with...
  23. R

    iOS app not connecting when on VPN; can login to BI machine through browser though

    You are the man! I been trying to get mine to work for a couple hours and decided to look at the forum and boom this one nailed it. Sent from my iPhone using Tapatalk
  24. R

    IPCT IPCT Upgrade Tonight! - Oct. 11, 2019

    I closed it and then updated the app but it still does it. I’m not a big fan of tapatalk either. Sent from my iPhone using Tapatalk
  25. R

    IPCT IPCT Upgrade Tonight! - Oct. 11, 2019

    It’s really glitchy on my taptalk. Screen keeps flashing. Sent from my iPhone using Tapatalk
  26. R

    No Link errors cause and buried cable suggestions...

    You will have the same issue in conduit unless you use gel filled direct bury cable. The problem is moisture and dc voltage. And conduit will sweat and become a water line. I see it all the time working telco. People and vendors will wire unattached buildings with good cat cable and think just...
  27. R

    My Speeding Dectector Setup

    I never thought you did. I say do whatever you need to do within reason to keep things safe in front of your house. I totally get it. It sucks to have to deal with that at your home. Sent from my iPhone using Tapatalk
    • Rakin
    • Post #41
    • Forum: LPR
  28. R

    Motion Detection best practice.

    Yeah all depending on what your frame rate, key frame and max bit rate is set at. Plus how many days worth do you really need? I was shooting for a month worth when I first set mine up. Then I started to tweak things for better quality and was running out in 10 days. I got a 10TB drive and I’m...
  29. R

    Issues with over-allocation, gaps in continuous recording

    Also might check the settings for each cam in BI. Go to record and make sure you don’t have any set to protect. Once you get your settings sorted out you may need to go and manually delete your files in your folders on the drive that keeps becoming over allocated then repair DB. Sent from my...
  30. R

    Motion Detection best practice.

    You can tweak object size and transparency and set up zones with rules so an object has to travel from one zone to the next. I don’t do zones with rules but I do have areas that are excluded like the highway and my neighbors driveway and such. All the false triggers were annoying at first but I...
Top Bottom