Search results

  1. SamM

    HikVision Facial Recognition Access Control

    Hi there Has anyone installed and explored the "new" Minmoe access control reader from HikVision? I am interested to hear your experiences, especially comments on the detection, i.e speed, accuracy (false positives and false negatives). I also would like to hear about any integration that has...
  2. SamM

    HikVision IVMS alternative

    Hi There Firstly, I am sure that you can set permissions to access certain modules, this is done in "User permissions", but the modules still appear in the main build. With a bit of programming knowledge (maybe even html) , you can do this for live view using the RTSP for each camera.
  3. SamM

    Get still image through URL from Hikvision NVR [SOLVED]

    Page 86 for FTP
  4. SamM

    Get still image through URL from Hikvision NVR [SOLVED]

    in configuration then advanced settings. whats your application as they also have a ftp option as well
  5. SamM

    Get still image through URL from Hikvision NVR [SOLVED]

    oh and Onvif needs to checked
  6. SamM

    Get still image through URL from Hikvision NVR [SOLVED]

    Hi /ISAPI/Streaming/channels/101/picture or /ISAPI/Streaming/channels/101/picture?videoResolutionWidth=1920&videoResolutionHeight=1080 only works on the cameras. Use the camera IP not the NVR
  7. SamM

    Ooops .. Looks like I bricked my cam ....

    Dave Try this https://github.com/btsimonh/826-x-ip-camera/wiki/Upgrade-File-Format also wireshark should point you to the repository where you possibly could get the older firmware Although I think that the system has exploits, it still is a nice picture. Maybe a good off net cheap solution.
  8. SamM

    IP camera manual exposure settings

    Most of the good brands allow manual settings but keep in mind BLC, WDR etc may conflict.
  9. SamM

    Help need in deleting the IP Camera's on a Hikvision DS-7608NI-K2/8P

    Remember to factory reset /default the cameras as well.
  10. SamM

    Ooops .. Looks like I bricked my cam ....

    Hello Dave 1. What software do you use to view them? 2. Any idea what webserver it uses for the update? Perhaps some screen shots of the web interface and software may help track this OEM
  11. SamM

    Thermal Cameras

    and it got us a discount for allowing them to use the site. Not sure if you would be able to do so as I see that no federal organisation can use them. Probably only the private sector....
  12. SamM

    Thermal Cameras

    Here is a case study that HV provided after the Pilot installation was completed.
  13. SamM

    Thermal Cameras

    We have different option commissioned at the site. At the ICU, It doesn't open the door if 1. Temp > 37.2 (remember .3C due to tolerance) 2. If there is not face mask 3. If the door sanitiser station was not used 4. If the person was not authorised (accredited medical staff) We have offered an...
  14. SamM

    Thermal Cameras

    Hi The average temperature is 34.5℃ = 97.5F We used a black body so the operating efficiency/ accuracy is reduced ±0.3℃ which is still in my opinion not acceptable Without that black body it is ±0.5℃ so this made us increase the high temp to 37.5℃ and low temp to 31.5℃ We are finding daily...
  15. SamM

    Thermal Cameras

    I have already installed this solution in health centres (entrances of the hospitals and ICU) and its not so bad. There are some pitfalls thought, such as, if you walk into the area (usually indoor foyer) from outside whilst being in the sun, you need to have a cool down period before passing...
  16. SamM

    Allow camera to access internet

    Do you want to view the camera directly of the internet and not via the NVR? If so this is not possible if you are using the internal NVR DHCP as there is not NAT between this and the NVR ethernet that is connected to the internet router. The IP class is different. To be able to achieve what...
  17. SamM

    Hikvision camera admin password reset tool

    Hi Thanks for the effort. Works well. Do you have MacOS method to flash the firmware to 5.4 for those newer models?
  18. SamM

    Universal IP tool for Axis, HikVision, Dahua, Bosch, Hanwah, Vivotek, Panasonic, Flir, etc.

    Hi Thank you for this. Any possibility to compile this in MacOS?
  19. SamM

    NO LINK appears on monitor in afternoon hours

    Hi 1. Is it dusk at those times? perhaps it could be when the camera changes to night mode, IR and power related. 2. What is the distance of each cable to the camera? from your explanation, it seems that the cameras are connected directly to the NVR and using the internal POE. 3. prior to...
  20. SamM

    NVR DST winter time do we lose 1 hour recording

    HI, The DST option checkbox flags the recording schedule for those 2 specific dates(start and stop DST), the recording schedule is typically 25hours for the date (for search/review) purposes
View older results
Top Bottom