Search results

  1. H

    NVR POE Switch Address Range

    hi there, i was just wondering if it would be possible to do change the NVR's POE Switch Network Address range to match those of my routers and then connect a cable from a port on the NVR switch directly to the router (Not the NVR LAN port). Basically treating the NVR POE switch as if it was...
  2. H

    NVR came w/ no Hard Drive - Any Recommendations?

    Western Digital Purple or Seagate Skyhawk are both hard drives made for surveillance use. I prefer Western Digital personally out of the two
  3. H

    PTZ not working (poe)

    Oh ok, which Poe injector do you use?
  4. H

    PTZ not working (poe)

    What is passive poe
  5. H

    A few different questions

    Ran into a small issue and looking for a bit of help. I've been using the IVS and auto tracking features (intrusion detection and abandoned object) and so far it worked well. I can view the log which show when events were triggered. I've turned off intrusion detection and replaced it with...
  6. H

    A few different questions

    Thanks a lot, that looks like exactly what I'm after
  7. H

    A few different questions

    I've got another that I'm hoping someone will have the answer to. If I have two PTZ cameras, one looking one way the other looking the other way. If PTZ #1 detects someone crossing a IVS tripwire, is there a way to get PTZ #2 to change direction and look at a certain preset, hope it makes...
  8. H

    PTZ movement schedule

    Thanks, the second link is dead lol
  9. H

    PTZ movement schedule

    Oh ok thanks, I tried searching but couldn't find anything, I'll try again though.
  10. H

    PTZ movement schedule

    The camera is SD6AL230F-HNI
  11. H

    PTZ movement schedule

    hi does anybody know if there is a way to set the ptz to do certain movements at scheduled times, e.g between 8am-9am look at preset 1, the every 10 mins do a scan, then at 9-5pm look at preset 2, etc thanks
    • h901
    • Thread
    • Replies: 7
    • Forum: Dahua
  12. H

    A few different questions

    Oh ok, I've only got SD6AL230F-HNI and an NVR
  13. H

    A few different questions

    hello just started playing around with my new dahua system but got a few questions that hopefully will be answered: 1 - how can i remove the day/date/time stamp from video 2 - theres a green line that goes around the edge of the screen when wathing from the nvr, any idea how to turn it off 3 -...
    • h901
    • Thread
    • Replies: 7
    • Forum: Dahua
  14. H

    PTZ not working (poe)

    Yes I've seen that but i was told the AC refers to when using a PSU and not Poe. So you can use either AC PSU or hi-poe, one or the other
  15. H

    PTZ not working (poe)

    I was told that AC/DC don't apply when it comes to Poe. I also tried Bosch npd-6001a and it didn't work
  16. H

    PTZ not working (poe)

    I tried a few different Poe injector, also tried using different cat6 cables and still not working
  17. H

    PTZ not working (poe)

    Just tested it with the PSU it comes with and it works, but for some reason doesn't work via poe
  18. H

    PTZ not working (poe)

    Thanks for your message, i cant go back to the shop until next week because it's far away so i was hoping I've just missed something out, what's the chances of two cameras being dead hey lol
  19. H

    PTZ not working (poe)

    I tried the power brick it came with and it didn't work, so went back to the shop and got a replacement camera, and this one doesn't seem to work as well
  20. H

    PTZ not working (poe)

    hi there i just fitted my dahua ptz (SD6AL230F-HNI) and its connected via to a 60w poe injector, the camera doesn't power on for some reason. i've tested the cable and it's working fine, i've also tried a second poe injector and the camera still doesn't work. does anyone have any ideas (the...
    • h901
    • Thread
    • Replies: 34
    • Forum: Dahua
  21. H

    PTZ Bracket Wiring Difficult

    hi there i was trying to install a dahua ptz today but was having difficulty getting the thick wiring from the camera up through the bracket, does anybody have any tips how to get it to go in (i didn't want to force it in case the wiring got damaged) thanks
    • h901
    • Thread
    • Replies: 0
    • Forum: Dahua
  22. H

    IP Camera cabling

    I know this is an old thread but just wanted to know why is there more work to install the rj45 plugs when using belden datatwist cable? Thanks
  23. H

    Cabling to Faceplate

    thanks for your reply, i terminate the cable from the camera with rj45 and the other end into the faceplate (is keystone jack and faceplate the same thing?) and then used a premade patch cable. had a bit of difficult getting the cat6 to bend to fit in the faceplate and also when punching...
  24. H

    Cabling to Faceplate

    Resurrecting this thread again as opposed to creating a new one. Tried it out and Poe doesn't work, does anybody know if that is because the faceplate affects the power from the NVR to the camera or something else. Thanks
  25. H

    POE Midspan/Injector

    cheers
  26. H

    POE Midspan/Injector

    hi got a quick question, i'm looking at a camera that says 'High-PoE&24 VAC, Max.32W' under its power needs. i've found a poe midspan (https://www.axis.com/files/datasheet/ds_t8133_1566503_en_1701.pdf) that says its 30w. Will this work or does it need to have 32w? Also if I get a 60w poe...
  27. H

    small grocery store setup

    What's a business class pc?
  28. H

    LPR/ANPR

    Cheers, not sure on the distances yet as it's just something I want to get in the near future. Does the above work with any camera?
  29. H

    LPR/ANPR

    hi just looking for some info on the recommended lpr/anpr solutions around. i've done a bit of research but can't seem to make out which one is best. also does anybody know which lpr/anpr camera systems they use at fuel stations looking for something that can be used to read number plates...
  30. H

    Hikvision and POE

    Ez rj45 connectors by platinum tools make the job much easier
Top Bottom