Search results
-
Is there a way to make certain cameras private?
Unfortunately, camera groups are created starting at the camera level. You edit a camera and you can add it to a new group called "kids" (or whatever). Then repeat for the other 61 cameras. Finally, under users, click to limit them to camera groups and pick "kids". Have you considered whether... -
I have a created a guest ssid under openwrt 22.03 firmware on my tplink router - can not view/open camera by typing local ip address
Most routers create a guest network with client isolation enabled. That means two devices, even if on the same guest network subnet can't see each other. Check your router to see if you can disable that setting for testing. By the way, doing things this way doesn't really separate your cameras...- VideoDad
- Post #3
- Forum: Networking
-
Help Enhancing picture House Broken into car stolen
There aren't really enough pixels to work with from this distance. I did try to add a little sharpening, but that's essentially adding noise. You might be better off hacking into the NSA satellites, then using the "zoom and enhance" command. It must be possible because they got a perfect image...- VideoDad
- Post #3
- Forum: Pics & Videos
-
People can mask USPS AI detections
it looks like the two events were separated by less than a second. It saw the 'usps' logo first which seems to have masked the 'ups' event. I'm not sure how to ensure you get both objects reported simultaneously in the same event if they are separate, but in the same 10 second period. This would... -
People can mask USPS AI detections
Personally I like to separate the function of the delivery detection to make it easier to send just those alerts, but I don't see why it wouldn't work combined. For me it is easier to deal with issues, say if the detection of another object is causing conflicts. -
Uploads to Platerecognizer
I'm not aware of any issues, however I'm on 5.6.8.4. I'm still getting successful plate detections. Could you clarify your issue? Is the issue in capturing images locally? Is that Plate Recognizer isn't being called for events with vehicles and plates? Is it that Plate Recognizer is being... -
OpenALPR Tool - Save and Query CSV Exports
Yes there are alert images. The idea was to make a call to save that image, the plate number, etc. and then use the database for quantifying plate hits, check trends, etc. It seems like they are building something like this for @MikeLud1 's ALPR module using Node Red and MQTT calls. I'm looking... -
OpenALPR Tool - Save and Query CSV Exports
I'm not discounting the capabilities of Rekor and the additional information it provides. If I had more and diverse traffic, I might opt for it. I was just looking to decouple the recognition step from the insertion in a local database and whatever processing before alerting, thinking it could... -
OpenALPR Tool - Save and Query CSV Exports
Thanks, I wasn't aware of that thread. Let me get to reading. :) -
OpenALPR Tool - Save and Query CSV Exports
I apologize if this is answered somewhere in this thread, but I'm wondering if this database and viewer can be used locally, independent of an OpenALPR / Rekor Scout subscription. I was hoping there was someway to feed a BI plate recognition into this utility directly, check for repeats, etc... -
Why does my LPR cam sometimes show static?
I haven't yet, but I'll keep that as an option the next time it happens. -
Why does my LPR cam sometimes show static?
No SD card, so that isn't a factor. Just the one firmware update recommended by @EMPIRETECANDY when I purchased the camera 2.840.15OG008.0.R, Build Date: 2022-02-18. BV-Tech 10 Port PoE+ Gigabit Ports 96W, POE-SW811G-PLUS. I suppose it could be a power issue. None of my other cameras have had... -
Why does my LPR cam sometimes show static?
I have a Loryta IPC-HFW5241E-Z12E camera (from @EMPIRETECANDY) that I got in Apr 2022. It's been actively capturing license plates very well, day and night. However, every few weeks I'll find it in a weird state where it is just showing static. I have to manually connect to the camera and reset... -
Ai for specific zone
I find the best way to handle this is to create a clone camera where you do the AI processing and alerting of zone B separately. -
People can mask USPS AI detections
Ok, I see what you are trying to do. If you see any motion (shadows, dog, person, whatever) in your lawn/walkway area, then check if a delivery logo is visible and flag/alert on the clip. I'm not sure it will work that way given the way BI processes the AI objects. I have a feeling it sees that... -
People can mask USPS AI detections
What are your motion sensor settings? I don't have any object or zones enabled to make it as simple as possible. Also, it seems you processing 8 images x 750ms (3/4 second) = 6 seconds. So are you sure that from the time BI senses motion until the logo is clearly in frame, it only takes 6 seconds? -
People can mask USPS AI detections
In my case, I have a master camera set up for recording any vehicles, people, etc. from that camera. I have a cloned camera (called "Delivery") where I set-up simple motion detection (no zones, etc.) and have it looking for the desired delivery logos: The email alert settings are pretty... -
Push Notifications for Certain Zones, Emails for Others
I've always had trouble getting AI to correctly trigger and do different things based on zones. For example, I wanted the camera to trigger recording of the mainstream whenever it saw a person or vehicle anywhere in the camera view, but only send an alert when a person is detected in a zone...- VideoDad
- Post #2
- Forum: Troubleshooting
-
Error Unable to create Yolo detector for model delivery
I also assume you have restarted the PC where BI and CPAI are installed? I can't see anything else different except I'm using CPU vs. GPU. -
People can mask USPS AI detections
I'm still holding off on releasing a new model because you seemed to want to include more pictures. Should I continue waiting? -
Error Unable to create Yolo detector for model delivery
I did a little more investigating and I think I know what might be happening. You might have your delivery.pt in the wrong folder. Previously the folder for custom models was: C:\Program Files\CodeProject\AI\AnalysisLayer\CustomDetection\assets The only thing that you should now see in there... -
Error Unable to create Yolo detector for model delivery
I'm also using 2.06 although I'm using 5.6.8.4 of BI. Could you post a picture of your CPAI server screen? Which Object model detection are you using (e.g. YOLOv5 6.2). Also, what happens if you use the CodeProject AI Explorer to do a custom model detection against a screenshot? Here's what... -
Error Unable to create Yolo detector for model delivery
What versions of Code project.AI and BI are you using? -
IR emitter for license plate recognition?
Can you post a representative picture of your nighttime plate captures along with a screenshot of your camera settings?- VideoDad
- Post #7
- Forum: Accessories
-
Get TrafficJunction Event information from offline Dahua Camera
In the review thread for this camera, others noted they didn't get back Direction. So I think it isn't possible. https://ipcamtalk.com/threads/review-ipc-lpr237b-ir-equivalent-of-dahua-itc237-pw6m-irlzf1050-b-anpr-traffic-access-control-camera.56463/post-720717- VideoDad
- Post #5
- Forum: Home Automation
-
People can mask USPS AI detections
Model updates are still in process. So yes, if anyone has more photos, this is a good time to get them included. -
People can mask USPS AI detections
Oops, I restored it from my trash. Try it now. -
People can mask USPS AI detections
Really? Let me check. Edit: I'm not seeing any issues with the download. I'm assuming you are using the link in the following post: https://ipcamtalk.com/threads/people-can-mask-usps-ai-detections.64393/post-680436 -
5.5.8 - June 13, 2022 - Code Project’s SenseAI Version 1 - See V2 here https://ipcamtalk.com/threads/codeproject-ai-version-2-0.68030/
@MikeLud1, I'm looking to retrain my delivery.pt model soon. It seems like the new version of CPAI has support for YOLOv5 6.2. Are you retraining your models for that? Also which size(s) are you targeting?- VideoDad
- Post #1,443
- Forum: What's New
-
People can mask USPS AI detections
I just need the jpg images without any rectangles, text or other markings, if possible. As many possible positions, angles, lighting conditions, open/closed doors as possible. Also if you have any false positives (times when it thought it saw a USPS logo where it wasn't), include those images.